.png){kind=icon}
.png){kind=icon}
Return
Microstructure and mechanical properties of fiber laser welded QP980 steel
.png){kind=icon}
PRE
AI
W
Z
P
Q
邹
Y
DOI：10.1016/j.jmatprotec.2018.02.015.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
The fusion zone of laser welded QP980 composed of fully martensitic structure exhibited high hardness (493 Hv). The sub-critical heat affected zone contained partially tempered martensite with a hardness drop (21 Hv). The joints and base metal showed positive strain rate dependent tensile strength, yield strength and energy absorption in dynamic strain rate regime, while elongation responded differently because of thermal softening effect. All the joints failed at base metal showing a typical ductile fracture. Fatigue limit of the joints was lower than that of base metal (171 MPa and 261 MPa, respectively). Fatigue specimens of Joints failed at weld area because of their higher sensitivity to stress concentration than base metal. Fatigue crack originated from the specimen surface, and propagated through fatigue striations together with secondary cracks.
Keywords:
QP steels
Laser welding
Microstructure
High strain rate
Digital image correlation (DIC)
Fatigue properties
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
J
IF:
7.5
Papers:
1.6W
Citations:
4.5W
Organization
Cited Papers