.png){kind=icon}
.png){kind=icon}
Return
Mini-block sampler
.png){kind=icon}
PRE
AI
DOI：10.1139/cgj-2015-0628.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
Challenges in obtaining high quality samples of sensitive low-plasticity clay in an effective manner have been overcome by the development of the mini-block sampler. The starting point for the development of the new sampler was the Sherbrooke block sampler that was first introduced in Canada in 1979. Although the Sherbrooke block sampler can produce high quality samples, its use, particularly in industrial projects, has been limited due to the perceived high costs, practical difficulties, and the time required. This paper outlines details of the development and design of the mini-block sampler together with developed techniques for protection and transportation of the samples and preparation of specimens for laboratory testing. The sampler has been used successfully at five Norwegian clay sites. For two of the sites comparative Sherbrooke samples were available and it is shown that the quality of the mini-block samples is very high and is at least as good as that of the Sherbrooke samples. The work also demonstrates that rigging, preparation, and sampling with the mini-block sampler is fast, practical and is not labour intensive. Furthermore the resulting samples are easy to transport and handle, but still provide sufficient material for extensive laboratory testing.
Keywords:
sampling
block sampling
clay
laboratory testing
Norway
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
IF:
3.5
Papers:
4.2K
Citations:
1.9W