.png){kind=icon}
.png){kind=icon}
Return
Mode selective up-conversion detection for LIDAR applications
.png){kind=icon}
OA
AI
DOI：10.1364/OE.26.015914.png)
.png){kind=icon}
.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
We study mode selective up-conversion detection as a viable approach to improving signal-to-noise and ranging resolution in LIDAR applications. It involves pumping a nonlinear waveguide at the edge of phase matching with picosecond pulses, so that only the backscattered signal photons in a single or few desirable time-frequency modes are efficiently up-converted while the broadband background noise in all other modes is rejected. We demonstrate a 41-dB increase in the signal-to-noise ratio for single-photon counting compared to that of direct detection using a commercial InGaAs single-photon detector, while achieving sub-millimeter ranging resolution with few detected photons. The proposed technique implies new LIDAR capabilities for ranging and imaging. (c) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement
Keywords:
1.5 MU-M
PHOTON
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.