.png){kind=icon}
.png){kind=icon}
Return
Model-Based Control for a Three-Phase Shunt Active Power Filter
.png){kind=icon}
OA
AI
DOI：10.1109/TIE.2016.2540580.png)
.png){kind=icon}
.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
This paper presents a robust model-based control in natural frame for a three-phase shunt active power filter. For the proposed control method, a linear converter model is deduced. Then, this model is used in a Kalman filter (KF) to estimate the system state-space variables. Even though the states estimation do not match the variables of the real system, it has allowed to design three sliding-mode controllers providing the following features to the closed-loop system: 1) robustness due to the fact that control specifications are met independently of any variation in the system parameters; 2) noise immunity, since a KF is applied; 3) a lower total harmonic distortion (THD) of the current delivered by the grid compared with the standard solution using measured variables; 4) the fundamental component of the voltage at the point of common coupling is estimated even in the case of a distorted grid; and 5) a reduction in the number of sensors. Thanks to this solution, the sliding surfaces for each controller are independent. This decoupling property of the three controllers allows using a fixed switching-frequency algorithm that ensures a perfect current control. Finally, experimental results validate the proposed control strategy and illustrate all its interesting features.
Keywords:
Current control
Kalman filter (KF)
LCL filter
sliding-mode control (SMC)
voltage-sensorless control
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
IF:
7.2
Papers:
1.8W
Citations:
9.8W