.png){kind=icon}
.png){kind=icon}
Return
Multiuser communications using passive time reversal
.png){kind=icon}
PRE
AI
DOI：10.1109/JOE.2007.904311.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
A recent paper (Song et al, IEEE Journal of Oceanic Engineering, vol. 31, no. 2, pp. 170 - 178, 2006) demonstrated multiple-input-multiple-output (MIMO) communications in shallow water using active time reversal where the time reversal array (i.e., base station) sent different messages to multiple users simultaneously over a common bandwidth channel. Passive time reversal essentially is equivalent to active time reversal with the communications link being in the opposite direction. This paper describes passive time reversal communications which enables multiple users to send information simultaneously to the time reversal array. Experimental results at 3.5 kHz with a 1-kHz bandwidth demonstrate that as many as six users can transmit information over a 4-km range in a 120-m-deep water using quaternary phase-shift keying (QPSK) modulation, achieving an aggregate data rate of 6 kb/s. Moreover, the same data rate has been achieved at 20-km range by three users using 16 quadrature amplitude modulation (16-QAM).
Keywords:
active time reversal
decision-feedback equalizer (DFE)
decision-feedback phase-locked loop (DFPLL)
intersymbol interference (ISI)
multiple-input-multiple-output (MIMO)
multiuser communication
passive time reversal
time reversal communication
Journal
IF:
5.3
Papers:
2.6K
Citations:
7.4K
