.png){kind=icon}
.png){kind=icon}
Return
Ni-Pt bimetallic adsorbent for deep desulphurization of coked benzene
.png){kind=icon}
PRE
AI
J
L
H
H
X
DOI：10.1007/s10450-025-00624-5.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
In the field of chemical engineering, achieving deep thiophene removal from coked benzene is a formidable challenge. This, coupled with the limitation of low sulfur capacity, has been major obstacle to the large-scale application of adsorption desulphurisation technology. In this study, Ni-Pt/Al2O3-CA adsorbent was prepared. The citric acid treated gamma-Al2O3 was used as the carrier, and Ni-Pt bimetal as the active component. The relationship between the microstructure and adsorption performance of the adsorbent was investigated by BET, XRD, SEM, TEM, TPR, XPS and Py-FTIR. The results showed that the Ni-Pt/Al2O3-CA adsorbent could not only reduce the thiophene content in benzene to less than 10 ppb but also had sulfur capacity of 2.73 mg S/g compared with the monometallic adsorbent. The adsorption performance of the Ni-Pt/Al2O3-CA adsorbent was restored to 95% of the initial one after three repetitive experiments. Meanwhile, based on the kinetic modelling results, the quasi-secondary kinetic model fitted the adsorption data of thiophene on Ni-Pt/Al2O3-CA adsorbent better. And the process of thiophene adsorption was described in depth in the diffusion model.
Keywords:
Deep desulphurization
Sulfur capacity
Benzene
Thiophene
Citric acid
Ni-Pt bimetallic
Journal
A
IF:
3.1
Papers:
2.1K
Citations:
3.9K
Organization
Cited Papers