Non-linear panel flutter for temperature-dependent functionally graded material panels

Hesham Ibrahim

doi:10.1007/s00466-007-0188-4

Return

Non-linear panel flutter for temperature-dependent functionally graded material panels

2007-07-13

PRE

Hesham Ibrahim

Mohammad Tawfik *

Mohammed A. Al-Ajmi

DOI：10.1007/s00466-007-0188-4

Original

Original request for help

Save

Abstract

En 中文

The non-linear flutter and thermal buckling of an FGM panel under the combined effect of elevated temperature conditions and aerodynamic loading is investigated using a finite element model based on the thin plate theory and von Karman strain-displacement relations to account for moderately large deflection. The aerodynamic pressure is modeled using the quasi-steady first order piston theory. The governing non-linear equations are obtained using the principal of virtual work adopting an approach based on the thermal strain being a cumulative physical quantity to account for temperature dependent material properties. This system of non-linear equations is solved by Newton-Raphson numerical technique. It is found that the temperature increase has an adverse effect on the FGM panel flutter characteristics through decreasing the critical dynamic pressure. Decreasing the volume fraction enhances flutter characteristics but this is limited by structural integrity aspect. The presence of aerodynamic flow results in postponing the buckling temperature and in suppressing the post buckling deflection while the temperature increase gives way for higher limit cycle amplitude.

Keywords:

functionally graded materials

panel flutter

thermal buckling