.png){kind=icon}
.png){kind=icon}
Return
Nonlinear second order plus time delay model identification and nonlinear PID controller tuning based on extended linearization method
.png){kind=icon}
PRE
AI
DOI：10.1016/j.conengprac.2024.106044.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
PID control systems based on the first order plus time delay model (FOPTD), which approximate the full system dynamics, are well-accepted for a wide range of linear processes. While such controllers can be applied to overdamped nonlinear processes, they often experience excessive overshoots and oscillations for general nonlinear processes. To overcome this limitation, we propose a novel method to design a nonlinear PID controller based on the second order plus time delay (SOPTD) model. The system nonlinearity requires parameter adjustments of the linearized model across operational ranges. Hence, in this work, it is handled by the extended linearization method (ELM), ensuring local stability under the assumptions of slow and small changes in operating points. Importantly, the model achieves global input-to-output stability even without the above constraints, provided there are no structural and parametric errors. The resulting nonlinear SOPTD model can describe changes in process gain and two time constants as the operation point varies. We demonstrate the applicability of our approach with a polymerization reactor simulation and liquid-level control experiments.
Keywords:
Nonlinear SOPTD
Extended linearization method
Nonlinear PID
Time-optimal control
Journal
IF:
4.6
Papers:
5.7K
Citations:
1.1W