On separation efficiency

E. L. Cussler

doi:10.1002/aic.13779

Return

On separation efficiency

2012-03-14

PRE

E. L. Cussler *

Binay K. Dutta

DOI：10.1002/aic.13779

Original

Original request for help

Save

Abstract

En 中文

Rising energy costs have renewed interest in energy efficient separations. Such efficiencies can be defined as the free energy of unmixing divided by the work done on and the heat added to the process. The greatest efficiencies occur when the energy cost far exceeds any capital cost. In this limit, rate processes are not important, and efficiency is governed by thermodynamics. Efficiencies for gas absorption and stripping are then typically around 50%. The efficiencies of liquidliquid extractions are lower, especially when one solute is wanted at higher concentration. The efficiencies of membrane separations are higher, but these require high pressure, normally obtained mechanically. As a result, membrane efficiencies should be reduced by any Carnot efficiency of generating the mechanical energy. These results, which are consistent with earlier estimates for distillation, have implications for carbon dioxide capture as a route to mitigating global warming. (C) 2012 American Institute of Chemical Engineers AIChE J, 2012

Keywords:

separation techniques

thermodynamics

classical

membrane separations

absorption

extraction

AI Summary

Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.