arrow
Return

Optimization of material processing profiles

delete1998-01-01
delete0
PRE
AI
R
Robert S. Salzar *
DOI:10.1016/S1359-8368(97)00026-7delete
deleteOriginal
deleteShare
deleteSave
Abstract

Abstract

En 中文
A definitive examination of the processing optimization of SiC/Ti-21S composite material is presented. Through the combination of a piecewise exact inelastic multiple concentric cylinder micromechanics model, a constitutive relation specifically designed for titanium alloy composites, and a nonlinear search optimization algorithm, a good overview of the advantages and problems of varying the processing parameters of time, temperature, and pressure is seen without any compromising assumptions. Four different failure modes are examined with respect to their material processing histories. By constraining the problem sufficiently to assure that complete consolidation of the composite takes place, the 'optimum' processing histories for each of the four objective functions is determined. In each case, only a limited improvement in the residual stress state is achieved. Of the four objective functions considered, the maximum change in any one stress component is approximately 12.5%, with the average change being around 8.0%. While this saving is significant, it may not be sufficient to alleviate all the problems associated with metal matrix composites. Similarly, the resulting stress savings may not be enough to warrant a redesign of the consolidation process hardware currently used in industry. (C) 1998 Elsevier Science Limited. All rights reserved.
Keywords:
processing
optimization
composites

Journal

Composites Part B-Engineering cover
Composites Part B-Engineering
IF:
14.2
Papers:
1.2W
Citations:
11.4W

Organization

No organization information available
Cited Papers

Cited Papers

Children's and Parents' Visual Perception of Physicians
err1999-04-01
err0
PREAI
errJames J. McCarthy; M. Christine McCarthy; Robert E. Eilert
errShare
errSave
errShare
errSave
errShare
errSave
Using KASP technique to screen LRRK2 G2019S mutation in a large Tunisian cohort
err2017-07-06
err0
errOAAI
errZied Landoulsi; Sawssan Benromdhan; Mouna Ben Djebara; Mariem Damak; Hamza Dallali; Rym Kefi; Sonia Abdelhak; Amina Gargouri-Berrechid; Chokri Mhiri; Riadh Gouider
errShare
errSave
Validation of the Lupus Impact Tracker in an Australian patient cohort
err2016-08-20
err0
PREAI
errA Antony; R K Kandane-Rathnayake; T Ko; D Boulos; A Y Hoi; M Jolly; E F Morand
errShare
errSave
errShare
errSave
no more