Return
Optimization of multi-source complex district heating network, a case study
DOI:10.1016/j.energy.2017.03.018.png)
Abstract
En 中文
The level of complexity for a district heating network increases with the maturity of the network, and this affects the pattern of the distribution of the hot water from the heat production sites to the end users. The majority of district heating systems are also multi-source networks, typically supported with heat from one main production site and other smaller satellite sites that are activated when required. In general, local energy companies have a lack of knowledge regarding how a meshed network behaves when different production sites are operated. The schedule of heat generation at the different sites is often based on staff experience and some general rules of thumb. In this paper a method for modeling and simulating complex district networks is further developed in order to optimize the total operating costs of a multi-source network, with constraints on the pressure and temperature levels in the user areas and on the heat generation characteristics at each production site. The optimization results show that the usage of the cheapest resources is preferred to a distributed generation of heat, even if some of the pipes may exceed the recommended thermal load capacity. The main site water supply temperature is found to be the lowest allowed by the constraint on the temperature of the water supplied to the end users, since the decrease of the costs associated with the lower thermal losses in the network is not counterbalanced by the increase of those associated with the pumping power of a larger water mass flow rate. (C) 2017 Elsevier Ltd. All rights reserved.
Keywords:
Optimization
Multi source
Heat production
Complex network
District heating
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
IF:
9.4
Papers:
4.3W
Citations:
20.2W
Organization
No organization information available
Cited Papers
A MINLP optimization of the configuration and the design of a district heating network: Academic study cases
ENERGY
IF9.4
Optimisation models for decision support in the development of biomass-based industrial district-heating networks in Italy
APPLIED ENERGY
IF11

