.png){kind=icon}
.png){kind=icon}
Return
Optimizing Fog Harps
.png){kind=icon}
PRE
AI
DOI：10.1021/acsami.1c08995.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
It has recently been demonstrated that harps harvest substantively more fog water than conventional mesh nets, but the optimal design for fog harps remains unknown. Here, we systematically vary key parameters of a scale-model fog harp, the wire material, wire pitch, and wire length, to find the optimal combination. We found stainless steel to not only be the best hydrophilic wire material but also nearly be as effective as Teflon-coated wires. The best choice for the wire pitch was coupled to the wire length, as the smallest pitch collected the most water for short harps but was hampered by tangling for taller harps. Accordingly, we use an elastocapillary wire tangling model to successfully predict the onset of tangling beyond a critical length for any given wire pitch. Combining what we learned, we achieved a water harvesting efficiency of 17% with an optimized stainless-steel harp, over three times higher than that of the current standard of a Raschel mesh. These results suggest that an optimal fog harp should feature high-tension, uncoated wires within a large aspect ratio frame to avoid tangling and promote efficient and reliable fog harvesting.
Keywords:
fog harvesting fog harp
anticlogging
elastocapillarity
wire tangling
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
IF:
8.2
Papers:
6.1W
Citations:
38.7W
Organization
No organization information available