Return
Optimizing polyurethane using as a buffer layer for supporting soft rock tunnels
DOI:10.1515/htmp-2025-0103.png)
Abstract
En 中文
Highway tunnels play a vital role in connecting cities and regions. Usually, lining structures with larger permissible deformation is considered a feasible solution to support soft rock tunnels. In this study, an optimized Polyurethane (PU) material was developed by conducting multiple laboratory trials, aiming to achieve a balance between low density, high compressive strength, high tensile strength, and low permeability. Such material is expected to serve as a buffer layer, facilitating stress release in the surrounding rocks and reducing support resistance. The optimized polyurethane is made up of 140:50:50:1.2:0.6:0.8:1.5:2.8 elements, which are composed of polyisocyanate, polyether triol, polyether tetrol, catalyst X, catalyst Y, foaming agent, chain extender, and foam stabilizer. The resulting polyurethane has a density of 145.4 kg/m3, solidifies in 58 s, exhibits a yield strength of 1.38 MPa, a tensile strength of 2.129 MPa, an elongation at break of 12.897 %, and a permeability coefficient of 1.24 & times; 10-5 cm/s. This work partially compensates for the limitations of foam concrete materials and provides an optimized support solution for large deformations in soft rock tunnels.
Keywords:
soft rock tunnels
buffer layer
polyurethane
orthogonal experiment
permeability coefficient
Journal
IF:
1.5
Papers:
39
Citations:
1.5K
Organization
Cited Papers
The Use of Polyurethane Injection as a Geotechnical Seismic Isolation Method in Large-Scale Applications: A Numerical Study
Geosciences
IF0
Quasi-Static Behavior of Palm-Based Elastomeric Polyurethane: For Strengthening Application of Structures under Impulsive Loadings
Polymers
IF0
Study on the Gelation Process and Mechanical Properties of Organic Polymer Grouting Materials Applied to Fissure Sealing in Underground Mines
Polymers
IF0

