.png){kind=icon}
.png){kind=icon}
Return
Parameter optimization of control system design for uncertain wireless power transfer systems using modified genetic algorithm
.png){kind=icon}
OA
AI
DOI：10.1049/cit2.12121.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
The closed-loop wireless power transfer (WPT) system can realize constant voltage output in the presence of perturbation. However, the parameter design of the controller is a difficult problem. The traditional trial-and-error method is time-consuming and difficult to find optimal parameters. A parameter optimization strategy of control systems for uncertain WPT systems using the modified genetic algorithm (MGA) is proposed. Firstly, because the system has different characteristics at different periods, the simulation process is divided into three stages. The first one is the start-up stage, in which we mainly consider the overshoot and the rate of the voltage rise. The second one is the tracking stage, in which the tracking time and switching loss are mainly considered. The third one is the stabilisation stage, in which the steady-state error and switching loss are mainly considered. Secondly, three cost functions are designed according to the characteristics of the three stages, and then the optimal controller parameters of each stage are obtained by using MGA. Finally, the effectiveness of the proposed method is verified by simulation. The optimization results show that compared with the previous parameter optimization method, the optimal controller parameters obtained by the proposed method make the WPT system achieve better performance.
Keywords:
ROBUST NONLINEAR CONTROL
MODEL-PREDICTIVE CONTROL
2ND-ORDER SLIDING-MODE
VIBRATION CONTROL
CONVERTERS
HORIZON
Journal
IF:
7.3
Papers:
653
Citations:
2.4K