.png){kind=icon}
.png){kind=icon}
Return
PID controller design for interval load frequency control system with communication time delay
.png){kind=icon}
PRE
AI
DOI：10.1016/j.conengprac.2019.05.016.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
In load frequency control (LFC), the data from measurements sensors are transmitted from far-off remote terminal units (RTUs) to the controlling center and control signals are transmitted from the controlling center to the plant location. These transmissions of various signals are possible via communication channels which are characterized by constant delays. Modern day power systems are quite complex in the present deregulated environment. This complexity has been further enhanced by the inherent delay introduced by the communication channels. Because of the communication delay, the conventional load frequency control design techniques give unacceptable performance. Further, in case of severe delay, the load frequency control system may become unstable. In view of this, a proportional-integral-derivative (PID) controller is designed using stability boundary locus (SBL) approach for interval single area power system with non-reheated thermal turbine and reheated thermal turbine having communication delay and then the proposed approach is validated on the multi-area IEEE 39-bus New England test system. The simulation results indicate the efficacy of the proposed methodology.
Keywords:
Communication time delay
Kharitonov's theorem
Load frequency control
Specific gain and phase margin
Stability boundary locus
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
IF:
4.6
Papers:
5.7K
Citations:
1.1W