.png){kind=icon}
.png){kind=icon}
Return
Potentiometric Ethene Sensor for Postharvest Detection Applications
.png){kind=icon}
PRE
AI
DOI：10.1149/2.0501915jes.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
A sensitive and selective electrochemical sensor for the detection of ethene is reported. Reduced Graphene Oxide (rGO)-Copper (Cu) nanocomposite modified Lanthanum Strontium Chromite (LSC) and Pt are used as electrodes. Yttria-Stabilized Zirconia (YSZ) is used as the solid electrolyte. This bilayer electrochemical sensor was suitable for the detection of up to 10 parts per billion (ppb) of ethene that is of significant interest for post-harvest monitoring applications. The mixed potential sensor responded non-linearly to varying concentrations of Ethene (0 to 100 ppb). A 30% reduction in ethene sensor response was observed when the relative humidity was increased to 80% (from 10%). The optimal operating temperature of the sensor was found to be 500 degrees C considering the sensitivity-response time trade-off. The device exhibited a strong interference rejection potential to NH3 and CO. The next generation of such a mixed potential sensor with integrated heaters and miniaturized implementation will enable the possibility of ethene sensor commercialization similar to the automotive oxygen sensor. (C) 2019 The Electrochemical Society.
Keywords:
GAS SENSORS
ETHYLENE
NANOPARTICLES
LIQUID
GROWTH
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
IF:
3.3
Papers:
3.3W
Citations:
9.4W