.png){kind=icon}
.png){kind=icon}
Return
Predicting grain boundary damage by machine learning
.png){kind=icon}
PRE
AI
DOI：10.1016/j.ijplas.2021.103186.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
Damage in metallic materials usually originates at grain boundaries where deformation leads to local strain incompatibility and stress concentration. Characteristics of a grain boundary affects its tendency to damage, but a quantitative understanding is still lacking. In this work, we utilize machine learning to predict grain boundaries susceptible for damage nucleation. To this end, synthetic 3D microstructures representing single-phase magnesium polycrystals with different textures were created. A Crystal Plasticity Fast Fourier Transform (CPFFT) framework was used to simulate the uni-axial tensile deformation of each microstructure. From the simulation results, those grain boundaries (GB) having strain incompatibility or stress concentration can be identified. We selected 46 crystallographic and geometric features for each GB to build classification models using the XGBoost algorithm. The model for predicting strain incompatible grain boundaries (SI-GBs) and the model for predicting stress concentration grain boundaries (SC-GBs) achieve the ROC-AUC (area under the receiving operating characteristic curve) scores of-87% and-82%, respectively, among all textures. From the classification models, the most important features that lead to SI-GBs or SC-GBs were identified. This work demonstrates that the combination of traditional simulation approaches and machine learning can yield new knowledge in fundamental material behaviors.
Keywords:
Grain boundaries
Microcracking
Microstructures
Crystal plasticity
Machine learning
Journal
IF:
12.8
Papers:
4.0K
Citations:
2.5W