.png){kind=icon}
.png){kind=icon}
Return
Real-Time B-Spline Interpolation for Harmonic Phasor Estimation in Power Systems
.png){kind=icon}
PRE
AI
DOI：10.1109/TIM.2022.3175054.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
The fundamental component synchrophasors are widely used nowadays, based on the use of phasor measurement units (PMUs), in several applications in electrical power systems. For the advancement of monitoring technology, harmonic synchrophasor estimation is still a challenge. To make it possible, it is necessary to correctly estimate the harmonic phasor (magnitude and phase of each harmonic component), mainly in scenarios with frequency deviations and noise. In this context, this present article proposes the use of B-spline-based interpolation as a preprocessing algorithm for the discrete Fourier transform (DFT). The performance is evaluated in terms of total vector error (TVE) considering the tests proposed by the IEEE C37.118.1 and IEC 60255-118-1 standards and compared with four different harmonic phasor estimation (HPE) methods, the HPE, sinc interpolation function-based estimator (SIFE), Taylor-Fourier transform (TFT), and flat-top finite impulse response (FT FIR). The proposed method can provide a TVE below 1% for all harmonic phasors, from the first to the fiftieth order, under significant frequency deviation. Also, for real-time validation, the proposed method was implemented in an industrial computer as a software routine capable of processing the signals in real time. The signals are acquired by a commercial merging unit (MU) and the samples are published using the IEC 61850 sampled values (SVs) protocol.
Keywords:
Interpolation
Discrete Fourier transforms
Estimation
Power system harmonics
Harmonic analysis
Phasor measurement units
Real-time systems
B-spline interpolation
harmonic phasor estimation (HPE)
phasor measurement unit (PMU)
real time
resampling
Journal
IF:
5.9
Papers:
1.9W
Citations:
5.8W
