.png){kind=icon}
.png){kind=icon}
Return
Real-time clock estimation using system time offset maintenance aiming at multi-GNSS time interoperability
.png){kind=icon}
PRE
AI
DOI：10.1016/j.measurement.2023.113929.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
Time interoperability is one of the important aspects of Global Navigation Satellite System (GNSS) compatibility and interoperability, which will greatly benefit the accuracy and availability of the positioning, navigation and timing (PNT) solution. In this paper, we proposed a real-time satellite clock estimation method using system time offset (STO) maintenance to help users realize GNSS time interoperability. First, receiver inter-system bias (ISB) was investigated and modeled for STO maintenance. Then, we presented clock estimation assessment results, which demonstrate that the new method can make the satellite clock product maintain a stable STO. Finally, precise point positioning (PPP) was used for further validation. The results show that in the condition of a 45 degrees cutoff elevation angle, fixing the ISB can significantly reduce the convergence time, increase the availability by 21.5%, and improve the average positioning accuracy in horizontal and vertical by 37.7% and 44.4%, respectively.
Keywords:
Multi-GNSS
Real-time clock estimation
System time offset
Time interoperability