.png){kind=icon}
.png){kind=icon}
Return
Resource based process planning for additive manufacturing
.png){kind=icon}
PRE
AI
DOI：10.1016/j.cad.2015.03.006.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
Resource consumption in additive manufacturing (AM) is often tied with the physical attribute of the fabricated part. Thus, optimizing the processes plan for minimum part fabrication resource requirement is a matter of great interest. In this work, the hierarchical nature of the AM process plan steps are emphasized and both build direction and material deposition direction are optimized while considering the resource requirement. A novel combined two-step optimization methodology is presented to determine optimal build direction for the object and material deposition direction for layers while considering minimum contour plurality, surface quality, build height, fabrication factor, and layer contour concavity to compensate the fabrication and resource limitations. The proposed methodology is implemented for an example object and the results indicate that the total build time can be significantly reduced compared to the total build time associated with arbitrary build and deposition directions. (C) 2015 Elsevier Ltd. All rights reserved.
Keywords:
Additive manufacturing
Process planning and optimization
Build direction
Material deposition direction
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
C
IF:
3.1
Papers:
3.1K
Citations:
6.4K