Return
Simultaneous esterification and transesterification of waste phoenix seed oil with a high free fatty acid content using a free lipase catalyst to prepare biodiesel
Y
S
DOI:10.1016/j.biombioe.2020.105930.png)
Abstract
En 中文
Biodiesel is a typical renewable and green energy, that is usually produced by the transesterification of edible vegetable oils. However, the cost of edible vegetable oils as feedstock accounts for 60%-80% of the total cost of biodiesel production. To overcome these issues, in this work, a low-cost feedstock, waste phoenix seed oil (PSO) with a high free fatty acid (FFA) content (30.1 +/- 0.6%), consisting of the main fatty acid, linoleic acid (30.2%), oleic acid (22.2%), and palmitic acid (17.4%), was developed as a new feedstock to prepare biodiesel. A novel one-step method including simultaneous esterification of FFAs and transesterification of the PSO to prepare biodiesel was developed. Free lipase was used as catalyst. The influences of the reaction parameters were explored and optimized by response surface methodology. The results showed that the free lipase Lipozyme TL100L from Thermomyces lanuginosus can simultaneously catalyze esterification and transesterification. Under the optimum conditions (enzyme load 9.7%, reaction time 6.9 h, reaction temperature 31 degrees C and substrate ratio (methanol/PSO) 4.3: 1 (mol/mol)), the maximum biodiesel yield (93.8 +/- 0.5%) was achieved. The activation energy from biodiesel preparation using PSO with a high FFA content was 39.7 kJ/mol. Furthermore, the kinetic values for K'm and Vmax were 0.18 mol/L and 0.043 mol/(L.min), respectively. The reaction mechanism of the simultaneous esterification and transesterification was also proposed. These results indicate that PSO with a high FFA content can be used as a potential feedstock for biodiesel production.
Keywords:
Biodiesel
Waste phoenix seed oil
High acid value oil
Esterification and transesterification
Response surface methodology
Free lipase
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
IF:
5.8
Papers:
8.4K
Citations:
2.2W

