.png){kind=icon}
Return
SiOx-Rich Electrode Directly Optimized Using Key Formulation Parameters
.png){kind=icon}
OA
AI
DOI：10.1149/1945-7111/ad5a41.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
The use of key parameters of the SiOx/graphite electrode formulation, and their critical values, makes it possible, without any trial-and-error type experimentation, to identify optimal electrode formulations for different SiOx/graphite mass ratios ranging up to 40:60. From the first attempt, electrodes presenting good cyclability at high surface capacity of 5.2 mA h cm(-2 )were formulated, reaching for example more than 93% capacity retention after 60 cycles in a full cell, with an electrolyte rich in FEC and EC-free, however with a prelithiation strategy. With a positive electrode based on NMC811, the gains in volumetric energy and power density are + 18 and + 28% compared to graphite, considering only the electrode volumes. The principle of using the key electrode formulation parameters introduced here is expected to accelerate and facilitate the optimization of electrode formulations.
Keywords:
batteries - lithium
batteries - Li-ion
energy storage
silicon
Journal
IF:
3.3
Papers:
3.3W
Citations:
9.4W
Organization
Cited Papers
ShareSave
ShareSaveShareSaveInvestigation of carbon-coated SiO phase changes during charge/discharge by X-ray absorption fine structure.png)
SOLID STATE IONICS
SOLID STATE IONICSIF3.3
PREAI
ShareSaveAnalogy between electrochemical behaviour of thick silicon granular electrodes for lithium batteries and fine soils micromechanicsELECTROCHIMICA ACTA
ELECTROCHIMICA ACTAIF5.6
PREAI
ShareSave
View more