.png){kind=icon}
Return
Solid-state optical scanning device using a beam combiner and switch array
.png){kind=icon}
OA
AI
DOI：10.1364/OPTICA.498402.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
Imaging optics cannot focus light beams emitted from different points onto one point with a lens. Therefore, fabricating a 3D image sensor with a focal plane array is challenging. We developed an imaging optics device with an intentionally shifted focal plane switch array comprising pixels with two optical antennas, a switch, and a receiver on a chip. We successfully illuminated a single point, received the reflected light with the same pixel, and scanned an illuminating target. The proposed system can serve as a 3D image sensor, with a detection range of 204 m for Lambertian reflectors with 94% reflectivity, and as abeam combiner for high-power lasers. (c) 2023 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement
Keywords:
PHASED-ARRAY
STEERING DEVICE
LIDAR
Journal
IF:
8.5
Papers:
2.4K
Citations:
2.1W
Organization
Cited Papers
ShareSaveDoppler velocimeter and vibrometer FMCW LiDAR with Si photonic crystal beam scanner.png)
OPTICS EXPRESSOAAI
OPTICS EXPRESSIF3.3
OAAIShareSaveTwo-dimensional free-space beam steering with an optical phased array on silicon-on-insulatorOPTICS EXPRESSOAAI
OPTICS EXPRESSIF3.3
OAAIShareSaveMonolithic integration of broadband optical isolators for polarization-diverse silicon photonicsOPTICAOAAI
OPTICAIF8.5
OAAIShareSaveSub-wavelength-pitch silicon-photonic optical phased array for large field-of-regard coherent optical beam steeringOPTICS EXPRESSOAAI
OPTICS EXPRESSIF3.3
OAAIShareSaveShareSave
View more