Soot aggregate restructuring during water processing

doi:10.1016/j.jaerosci.2013.08.001

Return

Soot aggregate restructuring during water processing

2013-12-01

PRE

Xiaofei Ma

Christopher D. Zangmeister

Julien Gigault

George W. Mulholland

Michael R. Zachariah *

DOI：10.1016/j.jaerosci.2013.08.001

Original

Original request for help

Save

Abstract

En 中文

Soot aggregate restructuring is explored in laboratory prepared soot particles upon exposure to high humidity environment followed by rapid water evaporation. Soot was generated in a Santoro style ethylene diffusion burner, and condensation of water on the soot particles was realized in a temperature-controlled water growth tube. The structure transformation of soot particles under different humidity conditions was monitored using a Differential Mobility Analyzer - Aerosol Particle Mass Analyzer (DMA-APM) and Tandem Differential Mobility Analyzer (TDMA) methods. The primary measured properties were mass-mobility scaling exponent, particle mass and mobility size before and after processing. A critical saturation ratio was observed above which aggregate restructuring occurred. The morphological change was visualized by taking electron microscopic images. X-ray photoelectron spectroscopy (XPS) analysis found that the chemical structures of different processed soot were indistinguishable. To assess if soot collapse occurred during water condensation or evaporation, water-coated soot was directly injected into water, where multi-angle light scattering showed that the structure was uncollapsed. This result indicates that soot restructuring driven by capillary forces occurs during evaporation, not condensation. (C) 2013 Elsevier Ltd. All rights reserved.

Keywords:

Differential mobility analyzer

Aerosol particle mass analyzer

Mass-mobility scaling exponent

Light scattering

Capillary force

XPS