Switching Optimized Modulation for Direct Three-Level Matrix Converter

doi:10.1109/TPEL.2023.3339480

Switching Optimized Modulation for Direct Three-Level Matrix Converter

2024-03-01

5

PRE

AI

DOI：10.1109/TPEL.2023.3339480

Original

Original request for help

Save

Abstract

En 中文

A direct three-level matrix converter (DTMC) has much lower switching frequency harmonic content than a conventional matrix converter (MC). Existing literature for controlling the former relies on the indirect approach of mathematically decomposing the converter into a two-level front-end converter and a three-level neutral-point-clamped inverter. The switching sequence for these two converters is independently synthesized before merging them to get the switching sequence for the DTMC. This decomposition obfuscates the redundancies in the switching vector duty cycle equations that govern this converter. The indirect approach produces significantly higher switching losses in the DTMC than the conventional MC despite having additional voltage levels, as demonstrated in this article. A new switching-loss optimized modulation strategy is proposed to overcome this limitation. The proposed method does not rely on mathematically decomposing the converter, thus being able to exploit the redundancies in the duty cycle equations. The proposed strategy leads to much lower switching loss than a conventional MC while retaining the benefit of lower harmonic content. The proposed method is verified in simulation and hardware using a 5 kW laboratory prototype.

Keywords:

Switches

Matrix converters

Capacitors

Voltage

Topology

Voltage control

Harmonic analysis

AC-AC converters

matrix converters (MCs)

multilevel converters

space vector pulsewidth modulation (PWM)

Switching Optimized Modulation for Direct Three-Level Matrix Converter

Abstract

Journal

Organization