Three-dimensional power system stabilizer

doi:10.1016/j.epsr.2009.12.014

Return

Three-dimensional power system stabilizer

2010-07-01

PRE

Damir Sumina *

Bulic, Neven

Igor Erceg

DOI：10.1016/j.epsr.2009.12.014

Original

Original request for help

Save

Abstract

En 中文

Power system stabilizers (PSSs) are used to enhance damping of power system oscillations through excitation control of synchronous generator. The objective of the PSS is to generate a stabilizing signal, which produces a damping torque component on the generator shaft. Conventional PSSs are designed with the phase compensation technique in the frequency domain and include the lead-lag blocks whose parameters are determined according to a linearized power system model. The performance of conventional PSSs (CPSSs) depends upon the generator operating point and the system parameters, but a reasonable level of robustness can be achieved depending on the tuning method. This paper presents a new threedimensional PSS (3D PSS), which uses rotor speed deviation, rotor acceleration and load angle deviation as input signals. The 3D PSS attempts to return the generator to the state-space origin, based on the generator's trajectory in state-space and the achievement of torque equilibrium. The 3D PSS is robust to system parameters changes. The proposed algorithm was implemented in a digital control system, tested in a laboratory environment on a synchronous generator connected to the power system, and then compared with CPSS. Experimental results show that the proposed PSS achieves better performance than the CPSS in damping oscillations. (C) 2010 Elsevier B.V. All rights reserved.

Keywords:

Power system stabilizer

Synchronous generator

Excitation control

AI Summary

Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.