Tolerance-based process plan evaluation using Monte Carlo simulation

doi:10.1080/0020754042000264608

Tolerance-based process plan evaluation using Monte Carlo simulation

2007-02-22

34

PRE

AI

DOI：10.1080/0020754042000264608

Original

Original request for help

Save

Abstract

En 中文

In the discrete part manufacturing industry, engineers develop process plans by selecting appropriate machining processes and production equipment to ensure the quality of finished components. The decisions in process planning are usually made based on personal experience and the verification of process plans is based on physical trial-and-error runs, which is costly and time-consuming. This paper proposes to verify process plans by predicting machining tolerances via Monte Carlo simulation. The basic idea is to use a set of discrete sample points to represent workpiece geometry. The changes of their spatial position are simulated and tracked as the workpiece undergoes a series of machining processes. Virtual inspections are then conducted to determine the dimensional and geometric tolerances of the machined component. Machining tolerance prediction is completed through: (1) manufacturing error synthesis, and (2) error propagation in multiple operations. In this way, engineers can quickly screen alternative process plans, spot the root error causes, and improve their decisions. Therefore, physical trial-and-error runs can be reduced, if not eliminated, resulting in significant savings in both time and costs.

Keywords:

COORDINATE-MEASURING-MACHINE

ERROR COMPENSATION

THERMAL ERRORS

TOOL-WEAR

STACK ANALYSIS

FIXTURE

ASSIGNMENT

DESIGN

SYSTEM

PREDICTION

Tolerance-based process plan evaluation using Monte Carlo simulation

Abstract

AI Summary

Journal

Organization