.png){kind=icon}
.png){kind=icon}
Return
Using Auxetic Structure for Flexible Strain Sensor: Simulation and Experiment
.png){kind=icon}
PRE
AI
DOI：10.1109/JSEN.2024.3518579.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
Flexible strain sensors are pivotal in human motion monitoring and flexible robotics. Achieving large strain response, high sensitivity, and stability, while the simplifying preparation process and reducing costs, is still a challenge. In this article, we demonstrate a novel flexible strain sensor based on auxetic structure, fabricated through layer-by-layer self-assembling polyetherimide (PEI) and multiwall carbon nanotubes (MWCNTs). Simulation analysis is conducted to explore the effect of the auxetic structure on the film strain, and then the flexible strain sensors are designed, fabricated, and examined. We find that the flexible strain sensors based on auxetic structures exhibit interlaced microcracks in both the transverse and longitudinal directions under strain, significantly amplifying the resistance changes. Thus, the sensors achieve a maximum strain coefficient of 499 (13x of those unpatterned strain sensors), a fast response with a response time of 37 ms and relaxation time of 38 ms, and excellent stability exceeding 15000 cycles. The sensors perform well in detecting throat vocalization and human limb movements, proving their prospects in human physiological signal detection and human health care.
Keywords:
Auxetic structure
flexible strain sensor
polyetherimide multiwall carbon nanotubes (PEI-MWCNTs)
Journal
IF:
4.5
Papers:
2.1W
Citations:
7.3W