.png){kind=icon}
.png){kind=icon}
Return
Vibroacoustic optimization using a statistical energy analysis model
.png){kind=icon}
PRE
AI
DOI：10.1016/j.jsv.2016.04.026.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
In this paper, an optimization technique for medium-high frequency dynamic problems based on Statistical Energy Analysis (SEA) method is presented. Using a SEA model, the subsystem energies are controlled by internal loss factors (ILF) and coupling loss factors (CLF), which in turn depend on the physical parameters of the subsystems. A preliminary sensitivity analysis of subsystem energy to CLF's is performed to select CLF's that are most effective on subsystem energies. Since the injected power depends not only on the external loads but on the physical parameters of the subsystems as well, it must be taken into account under certain conditions. This is accomplished in the optimization procedure, where approximate relationships between CLF's, injected power and physical parameters are derived. The approach is applied on a typical aeronautical structure: the cabin of a helicopter. (C) 2016 Elsevier Ltd. All rights reserved.
Keywords:
Medium-high frequencies
Statistical energy analysis
Coupling loss factors
Input power
Optimization
Helicopter cabin
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
IF:
4.9
Papers:
1.7W
Citations:
4.8W
