.png){kind=icon}
.png){kind=icon}
Return
Volume grating preferential-order focusing waveguide coupler
.png){kind=icon}
PRE
AI
DOI：10.1364/OL.24.001708.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
A volume grating focusing waveguide coupler has been designed, fabricated, and tested. The volume grating is designed to couple a 633-nm wave guided in a single-mode polyimide waveguide preferentially into the air cover. The beam is outcoupled normally to the surface of the waveguide and focused to a line 25 mm above the waveguide. The slanted-fringe volume grating is holographically recorded by the interference of two coherent 364-nm ultraviolet waves focused with a cylindrical lens to produce the chirped grating. The 1-mm-long volume grating coupler exhibits a preferential-coupling ratio of 0.98, a coupling efficiency of 95%, and an almost diffraction-limited focal line with a full width at half-maximum of 10.49 mu m. (C) 1999 Optical Society of America.
Journal
IF:
3.3
Papers:
4.0W
Citations:
7.6W
Organization
No organization information available