logo
CanyamAI summaries for academic research
language
MobileMobile
  • Phone FeatureWeChat Mini Program
EnglishEnglish
noticeNotice
BlogBlog
delete
arrow
Back
R

Rolls-Royce Holding Group

Scholars764
Papers900
Citations0
Related Papers (900)
Publication Date
delete
Application of filtering strategies for 3D striation spacing measurements
errEngineering Failure Analysis
IF5.7
err2026-09-30
err0
PREAI
errAlyousif, Yousif; Saunders, Edward A.; Taylor, Susan; Walker, John C.; Reed, Philippa A. S.
errShare
errSave
Rapid bulk residual stress relief of laser-welded aerospace alloys by electropulsing treatment
errJournal of Manufacturing Processes
IF6.8
err2026-09-01
err0
PREAI
errAprilia, Aprilia; Tan, Jin Lee; Ling, Zixuan; Gill, Vincent; Williams, Paul E.; Jones, Martyn A.; Zhou, Wei
errShare
errSave
Physics based coupled thermo-hydraulic framework for steady-state wick-type heat pipe reduced-order modeling
errApplied Thermal Engineering
IF6.9
err2026-08-01
err0
PREAI
errChandran, K. Nandakumar; Chetwynd-Chatwin, Jason; Ha, Man Yeong; Min, June Kee
errShare
errSave
Composite nickel-particulate coatings via electrodeposition from ethaline (DES); part 2, wear resistance and friction
errTransactions of the Institute of Metal Finishing
IF1.5
err2026-07-04
err0
PREAI
errJuma, Jamil A.; Haji, Khozan A.; Abdallah, Hassan H.; Karim, Wrya O.; Ryder, Karl S.; Abbott, Andrew P.; Pallett, Lloyd; Pattinson, Glen
errShare
errSave
Process monitoring of thermal crimping systems using sensorisation and Machine Learning
errJournal of Advanced Joining Processes
IF4
err2026-07-01
err0
PREAI
errHerdea, Ioan-Alexandru; Tiwari, Divya; Jewell, Geraint; Lambourne, Alexis; Farnsworth, Michael; Tiwari, Ashutosh
errShare
errSave
Some Comments on the Measurement of Plastic Strain with Implications to Deformation in Electro-Thermal Mechanical Testing (ETMT)
errMETALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
IF2.5
err2026-06-01
err0
errOAAI
errD'Souza, N.; Roebuck, B.; Agarwal, S.; Edmonds, I. M.; West, G. D.; Collins, D. M.
errShare
errSave
Composite nickel-particulate coatings via electrodeposition from ethaline (DES); part 1, fabrication and characterisation
errTransactions of the Institute of Metal Finishing
IF1.5
err2026-05-04
err0
PREAI
errJuma, Jamil A.; Haji, Khozan A.; Abdallah, Hassan H.; Karim, Wrya O.; Ryder, Karl S.; Abbott, Andrew P.; Pallett, Lloyd; Pattinson, Glen
errShare
errSave
Characterization and Performance Testing of Additively Manufactured Alloy 625 in High-Temperature Water
errCorrosion
IF1.3
err2026-05-01
err0
PREAI
errHall, James; Mozumder, Yahya H.; Duff, Jonathan; Perkins, Karen; Watkins, Tim; Pickering, Ed; Scenini, Fabio
errShare
errSave
Corrosion of Rare-Earth Disilicate Environmental Barrier Coatings in Gas Turbine Environments Microstructure Model
errJournal of Engineering for Gas Turbines and Power-Transactions of the ASME
IF2.1
err2026-05-01
err0
PREAI
errCha, Chong M.; Ridley, Mackenzie J.
errShare
errSave
Aerothermal-Structural Optimization of a High-Pressure Turbine Rotor With Robustness Evaluation to in-Service Deterioration
errJournal of Turbomachinery-Transactions of the ASME
IF3.1
err2026-05-01
err0
PREAI
errCarta, Mario; Putzu, Roberto; Ghisu, Tiziano; Shahpar, Shahrokh
errShare
errSave
Setting Robust Manufacturing Tolerances for Turbine Trailing Edge Film Cooling
errJournal of Turbomachinery-Transactions of the ASME
IF3.1
err2026-05-01
err0
PREAI
errvon Mueller, Tassilo; Ireland, Peter; Jackson, Dougal
errShare
errSave
Frequency Scaling Laws for Active Separation Control on Flat-Plate Wings
errAIAA Journal
IF2.8
err2026-05-01
err1
PREAI
errVey, Stefan; Paschereit, Christian Oliver; Greenblatt, David
errShare
errSave
On Runway Foreign Object Ingestion With a Variable Pitch Fan in Reverse Thrust Mode
errJournal of Engineering for Gas Turbines and Power-Transactions of the ASME
IF2.1
err2026-05-01
err0
errOAAI
errVitlaris, Dimitrios; Rajendran, David John; Tunstall, Richard; Moore, Barry; Clarkson, Rory; Pachidis, Vassilios
errShare
errSave
Development and Assessment of Dual-Fuel Capabilities in Next-Generation Aero-Engine Injectors for Hydrogen and Liquid Fuels
errJournal of Engineering for Gas Turbines and Power-Transactions of the ASME
IF2.1
err2026-04-01
err0
PREAI
errBuro, Sofya; Eggels, Ruud; Nicolai, Hendrik; Hasse, Christian
errShare
errSave
Advancing regulatory aircraft nvPM sampling and measurement practices: Uncertainty quantification and recommendations
errJournal of Aerosol Science
IF2.9
err2026-04-01
err0
errOAAI
errDurand, Eliot; Durdina, Lukas; Harper, Joseph; Spirig, Curdin; Roth, Manuel; Smallwood, Greg; Johnson, Mark; Lidstone-Lane, Fergus O. N.; Williams, Paul I.; Crayford, Andrew
errShare
errSave
Medium-Cycle Fatigue Behavior of Three Metallic Materials and a Welded Steel Following Gaseous Hydrogen Soaking
errFATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
IF3.2
err2026-03-01
err0
errOAAI
errKufoin, E.; Bannister, A.; Brown, M.; Engelberg, D.; Kahlon, N.; Scenini, F.; Zhou, Y.; Susmel, L.
errShare
errSave
On a Novel Co-Rotating Synchronous Turbine Mode Operation in a Centrifugal Compressor
errJournal of Engineering for Gas Turbines and Power-Transactions of the ASME
IF2.1
err2026-03-01
err0
PREAI
errRajendran, David John; Palma, Eduardo Anselmi; Roumeliotis, Ioannis; Pachidis, Vassilios; Sayre, David; Howarth, Nicholas
errShare
errSave
Insights Into the Evolution of Powder Metallurgy Ni-Base Superalloys During Consolidation and Thermomechanical Processing Using Microstructure Analytics
errAdvanced Engineering Materials
IF3.3
err2026-03-01
err0
PREAI
errArciniaga, Luis F.; Thome, Pascal; Lowery, Owen; Severs, Kevin; Wesseling, Paul; Hardy, Mark; Argyrakis, Christos; Tin, Sammy
errShare
errSave
Characterising the Effect of Environment and Salt Concentration on the Fatigue Life of a Nickel Disc Alloy
errMETALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
IF2.5
err2026-03-01
err0
PREAI
errHardy, M. C.; Li, Y.; Rodenkirchen, C.; Gray, S.; Jackson, C.; Mignanelli, P. M.; Cockings, H.; Davies, H.; Pedrazzini, S.
errShare
errSave
A Loss Prediction Model for Manufacturing Variations on High-Pressure Turbine Blade Shroud Platforms
errJournal of Turbomachinery-Transactions of the ASME
IF3.1
err2026-03-01
err0
PREAI
errHulhoven, Bram; Coull, John D.; Jackson, Dougal; Atkins, Nicholas R.
errShare
errSave