logo
CanyamAI summaries for academic research
language
MobileMobile
  • Phone FeatureWeChat Mini Program
EnglishEnglish
noticeNotice
BlogBlog
delete
arrow
Back
M

Mtu Aero Engines

Scholars105
Papers75
Citations0
Related Papers (75)
Publication Date
delete
Miniature Mechanical Testing to Infer Damage fromAccidental and Complex Thermal Exposure for Single CrystalSuperalloys
errMETALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
IF2.5
err2026-05-01
err0
PREAI
errTang, Yuanbo T.; Schwalbe, Caspar; Brunthaler, Julia; Reed, Roger C.; Utada, Satoshi
errShare
errSave
Reducing Low-Pressure Turbine Shroud Leakage Loss by Optimizing Leakage-Mainstream Interaction
errJournal of Turbomachinery-Transactions of the ASME
IF3.1
err2026-05-01
err0
PREAI
errCamarero Pueyo, Josue-Inocente; Helmsen, Eike; Oettinger, Marcel; Klingl, Stefan; Junghans, Haris; Palkus, Kacper; Wein, Lars
errShare
errSave
A geometric characterisation of PH-cubics via the focus of the cusp curve
errComputer Aided Geometric Design
IF1.7
err2026-04-01
err0
PREAI
errMokris, Dominik
errShare
errSave
Numerical Demonstration of NO Emissions Reduction by Steam Injection in the Aero Engine Combustor IAE V2500
errJournal of Engineering for Gas Turbines and Power-Transactions of the ASME
IF2.1
err2026-03-01
err0
PREAI
errHiestermann, Marian; Haeringer, Matthias; Desor, Marcel; Niebler, Korbinian; Berger, Lukas
errShare
errSave
A Test Facility for the Experimental Investigation of Labyrinth Seal Flutter and Early-Stage Validation of Prediction Techniques
errJournal of Turbomachinery-Transactions of the ASME
IF3.1
err2026-01-01
err0
PREAI
errMace, Tom; Schwingshackl, Christoph; Korte, Detlef; Greco, Michele; Corral, Roque; Bermejo Jimenez, Oscar; Gallego-Garrido, Jon
errShare
errSave
Intake distortions and their impact on compressor stability: an overview and evaluation of current approaches
errCEAS Aeronautical Journal
IF0
err2025-10-01
err0
PREAI
errHaber, Amelie; Kozulovic, Dragan
errShare
errSave
Deep learning meta architecture to detect spatially coherent coarse grain regions in ultrasonic data
errNDT & E INTERNATIONAL
IF4.5
err2025-07-01
err0
PREAI
errElischberger, Frederik; Jiang, Xiaoyi
errShare
errSave
The Black Metal Tribometer: High-resolution measurement of normal load-indentation curves and partial slip hysteresis cycles
errTRIBOLOGY INTERNATIONAL
IF6.9
err2025-06-01
err0
errOAAI
errFochler, Daniel; Schwarz, Stefan; Kohlmann, Lukas; Krack, Malte
errShare
errSave
A Monte-Carlo approach for crack initiation modeling of cast superalloys informed by crystal plasticity
errINTERNATIONAL JOURNAL OF FATIGUE
IF6.8
err2025-01-01
err0
PREAI
errSayer, Niklas; Fried, Markus; Muenstermann, Sebastian
errShare
errSave
Numerical Simulations and Experimental Validation of Squeeze Film Dampers for Aircraft Jet Engines
errLUBRICANTS
IF2.9
err2024-07-13
err0
errOAAI
errGolek, Markus; Gleichner, Jakob; Chatzisavvas, Ioannis; Kohlmann, Lukas; Schmidt, Marcus; Reinke, Peter; Rienacker, Adrian
errShare
errSave
Influence Factors of Platinum Dissolution in Proton Exchange Membrane Fuel Cells: A Sensitivity Study
errJOURNAL OF THE ELECTROCHEMICAL SOCIETY
IF3.3
err2024-05-24
err3
errOAAI
errStiegeler, Julian; Mittermeier, Thomas; Tsikonis, Leonidas; Lehre, Thilo; Vierrath, Severin
errShare
errSave
Numerical prediction of primary dendrite arm spacing (PDAS), properties of the mushy zone, and freckle risk for various multicomponent Ni-base superalloys using the 3D-phase-field method
errCOMPUTATIONAL MATERIALS SCIENCE
IF3.3
err2024-03-01
err3
errOAAI
errBoettger, B.; Seiz, A.; Sowa, R.; Berger, R.; Apel, M.
errShare
errSave
A comparison of smooth basis constructions for isogeometric analysis
errCOMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
IF7.3
err2024-02-01
err4
errOAAI
errVerhelst, H. M.; Weinmueller, P.; Mantzaflaris, A.; Takacs, T.; Toshniwal, D.
errShare
errSave
Microstructure and mechanical properties of additively manufactured γ-TiAl with dual microstructure
errINTERMETALLICS
IF4.8
err2023-10-01
err11
PREAI
errKnorlein, Julia; Franke, Martin Michael; Schloffer, Martin; Berger, Timo; Korner, Carolin
errShare
errSave
Microstructural influences on fatigue threshold behavior and fracture toughness of an additively manufactured γ-titanium aluminide
errINTERMETALLICS
IF4.8
err2023-05-01
err7
errOAAI
errZeiler, Stefan; Lintner, Arthur; Schloffer, Martin; Pippan, Reinhard; Hohenwarter, Anton
errShare
errSave
Interdisciplinary design optimization of compressor blades combining low- and high-fidelity models
errSTRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
IF4
err2023-03-16
err3
errOAAI
errPretsch, Lisa; Arsenyev, Ilya; Czech, Catharina; Duddeck, Fabian
errShare
errSave
Prediction of the crack growth propagation direction in non-proportional mixed-mode missions
errINTERNATIONAL JOURNAL OF FATIGUE
IF6.8
err2023-01-01
err10
PREAI
errAmato, Daniele; Mayrhofer, Lukas; Robl, Christian; Dhondt, Guido; Citarella, Roberto
errShare
errSave
Generalized and wavelength-dependent temperature calibration function for multipoint regenerated fiber Bragg grating sensors
errOPTICS EXPRESS
IF3.3
err2022-11-23
err2
errOAAI
errBuchfellner, Fabian; Stadler, Andrea; Bian, Qiang; Hennesen, Maximilian; Zeisberger, Andreas; Koch, Alexander W.; Roths, Johannes
errShare
errSave
In-situ aluminum control for titanium aluminide via electron beam powder bed fusion to realize a dual microstructure
errADDITIVE MANUFACTURING
IF11.1
err2022-11-01
err19
PREAI
errKnoerlein, Julia; Franke, Martin Michael; Schloffer, Martin; Koerner, Carolin
errShare
errSave
Prediction and validation of the strongly modulated forced response of two beams undergoing frictional impacts
errMECHANICAL SYSTEMS AND SIGNAL PROCESSING
IF8.9
err2022-11-01
err4
errOAAI
errMonjaraz-Tec, C.; Kohlmann, L.; Schwarz, S.; Hartung, A.; Gross, J.; Krack, M.
errShare
errSave