logo
CanyamAI summaries for academic research
language
MobileMobile
  • Phone FeatureWeChat Mini Program
EnglishEnglish
noticeNotice
BlogBlog
delete
arrow
Back
S

Sushanta Kumar Panda

indian institute of technology system (iit system)

36H-index
165Paper Count
3.6KCitation Count
Published Papers 62
Publication Date
logo
On Improvement in Mechanical Properties by Aging Heat Treatment of Deformed Cu-Cr-Zr-Ti Component Fabricated through SPIF Process
errJournal of Materials Engineering and Performance
IF2
err2026-01-01
err0
PREAI
errBehera, Dibya Ranjan; Murty, S. V. S. Narayana; Kar, Sujoy Kumar; Panda, Sushanta Kumar
errShare
errSave
Numerical and experimental analyses on failure limits of DP600 steel sheets during two-stage forming processes
errinternational journal of advanced manufacturing technology
IF0
err2025-08-19
err0
PREAI
errShamik Basak; Sushanta Kumar Panda
errShare
errSave
Study of the microstructure, mechanical properties and forming behaviour of graphene-interlayered resistance spot-welded patch blanks of dissimilar ultra-low carbon cold-rolled and dual-phase steel sheets
errMATERIALS TODAY COMMUNICATIONS
IF4.5
err2025-01-01
err0
PREAI
errDas, Tanmoy; Katiyar, Bhupesh Singh; Panda, Sushanta Kumar; Arora, Kanwer Singh; Paul, Jinu
errShare
errSave
A novel attempt to deform electron beam welded C-103 refractory alloy sheets using multi-stage single point incremental forming for space applications
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2024-12-01
err0
PREAI
errKatiyar, Bhupesh Singh; Kundu, Prasun; Behera, Dibya Ranjan; Rakshit, Rahul; Kumar, Ravi Ranjan; Murty, S. V. S. Narayana; Kar, Sujoy Kumar; Panda, Sushanta Kumar
errShare
errSave
Microstructure characterization and formability assessment of electron beam welded Nb-10Hf-1Ti (wt.%) refractory alloy sheets
errINTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
IF4.6
err2024-12-01
err1
PREAI
errBehera, Dibya Ranjan; Prakash, P. S. Lin; Kundu, Prasun; Kumar, Ravi Ranjan; Murty, S. V. S. Narayana; Kar, Sujoy Kumar; Panda, Sushanta Kumar
errShare
errSave
Crushing performance of cost-effective tubular components of AA 5083-O fabricated through friction stir welding process for automotive application
errARCHIVES OF CIVIL AND MECHANICAL ENGINEERING
IF4.4
err2024-09-22
err1
PREAI
errSen, Debolina; Katiyar, Bhupesh Singh; Panda, Sushanta Kumar; Pal, Surjya Kanta
errShare
errSave
Friction stir seam- and spot-welded aluminium honeycombs: Enhanced structural integrity eliminating adhesive bonding challenges
errJOURNAL OF MATERIALS PROCESSING TECHNOLOGY
IF7.5
err2024-09-01
err1
PREAI
errDutta, Ananta; Pal, Surjya K.; Panda, Sushanta K.
errShare
errSave
Forming limit and failure characterization of as-received and bi-axial prestrained Cu-Cr-Zr-Ti alloy sheets in the context of multistage forming
errMATERIALS CHARACTERIZATION
IF5.5
err2024-08-01
err1
PREAI
errBehera, Dibya Ranjan; Katiyar, Bhupesh Singh; Panda, Sushanta Kumar; Kar, Sujoy Kumar; Murty, S. V. S. Narayana
errShare
errSave
Comprehensive investigation on crushing performance and collapse mechanism of friction stir welded aluminium honeycomb by damage modeling
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2024-06-01
err2
PREAI
errDutta, Ananta; Pal, Surjya K.; Panda, Sushanta K.
errShare
errSave
Fabrication of a prototype of bumper beam by single point incremental forming of laser welded tailored blank and characterization of its quasi-static crushing performance
errARCHIVES OF CIVIL AND MECHANICAL ENGINEERING
IF4.4
err2024-05-06
err0
PREAI
errKatiyar, Bhupesh Singh; Panda, Sushanta Kumar; Saha, Partha
errShare
errSave
High temperature uniaxial deformation characteristics in Al-Li alloy: Insights into the perspective of microstructure, microtexture and slip system activity
errMATERIALIA
IF2.9
err2024-05-01
err4
PREAI
errRakshit, Rahul; Sudarsan, Coomar; Panda, Sushanta Kumar; Mandal, Sumantra
errShare
errSave
Experimental and numerical assessment of thermomechanical and morphological characteristics of pin and pinless micro friction stir welds
errMATERIALS TODAY COMMUNICATIONS
IF4.5
err2024-03-01
err3
PREAI
errDutta, Ananta; Pal, Surjya K.; Panda, Sushanta K.
errShare
errSave
Backing plate material selection for optimizing joint performance in friction stir welded aluminium honeycomb
errJOURNAL OF SANDWICH STRUCTURES & MATERIALS
IF2.8
err2024-02-04
err1
PREAI
errDutta, Ananta; Pal, Surjya K.; Panda, Sushanta K.
errShare
errSave
Enhanced toughness and strength of 3D printed carbide-oxide composite for biomedical applications
errJOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS
IF3.5
err2024-02-01
err1
PREAI
errDas, Manojit; Dixit, Astha; Jana, Arijit; Karthik, R.; Sreeram, P. R.; Bora, Hema; Dhara, Santanu; Panda, Sushanta Kumar; Tiwary, Chandra Sekhar
errShare
errSave
A novel method of fabricating aluminium honeycomb core by friction stir welding
errTHIN-WALLED STRUCTURES
IF6.6
err2023-12-01
err7
PREAI
errDutta, Ananta; Pal, Surjya K.; Panda, Sushanta K.
errShare
errSave
Study of beam wobbling technique and porosity formation in laser welding of ultra-thin AA1050 sheet-microstructural and mechanical analysis
errINTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
IF3.1
err2023-11-03
err5
PREAI
errPamarthi, Venkat Vivek; Sudarsan, Coomar; Das, Abhishek; Hazra, Sumit; Panda, Sushanta Kumar
errShare
errSave
3D printing of tough nature inspired hierarchical architecture using chicken bone and eggshell biowaste for biomedical applications
errCERAMICS INTERNATIONAL
IF5.6
err2023-09-01
err9
PREAI
errDas, Manojit; Jana, Arijit; Dixit, Astha; Mishra, Rajat; Maity, Swapan; Karthik, R.; Basha, Shaik Salam; Maiti, Pralay; Panda, Sushanta Kumar; Arora, Amit; Owuor, Peter Samora; Tiwary, Chandra Sekhar
errShare
errSave
Deep drawing and redrawing of solution-treated Cu-Cr-Zr-Ti alloy sheets and post-forming characterization of the redrawn cup wall
errARCHIVES OF CIVIL AND MECHANICAL ENGINEERING
IF4.4
err2023-08-09
err4
PREAI
errBehera, Dibya Ranjan; Katiyar, Bhupesh Singh; Das, Sayan; Panda, Sushanta Kumar; Kar, Sujoy Kumar; Murty, S. V. S. Narayana
errShare
errSave
Use of uncoupled ductile damage models for fracture forming limit prediction during two-stage forming of aluminum sheet material
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2023-07-01
err28
PREAI
errBasak, Shamik; Panda, Sushanta Kumar
errShare
errSave
Effect of particle size on additive manufacturing of complex architecture of silicon carbide
errCERAMICS INTERNATIONAL
IF5.6
err2023-06-01
err6
PREAI
errJana, Arijit; Das, Manojit; Tiwari, Shivam; Basha, Shaik Salam; Gautam, Abhay Raj Singh; Panda, Sushanta Kumar; Mitra, Rahul; Kumar, Shobhit; Devasia, Renjith; Tiwary, Chandra Sekhar
errShare
errSave

Research Directions

No research directions
Co-authors
Cooperation Journals
A
Ajay Singh
H-index: 101 · Papers: 3.0K
C
C.N. Tomé
H-index: 85 · Papers: 362
Y
Y. Zhou
H-index: 85 · Papers: 1.0K
C
Chandra Sekhar Tiwary
H-index: 67 · Papers: 618
A
A.P. Gerlich
H-index: 66 · Papers: 278
View more