logo
CanyamAI summaries for academic research
language
MobileMobile
  • Phone FeatureWeChat Mini Program
EnglishEnglish
noticeNotice
BlogBlog
delete
arrow
Back
S

Sudhanshu S. Singh

indian institute of technology

41H-index
245Paper Count
5.0KCitation Count
Published Papers 106
Publication Date
logo
Microstructure evolution and wear behavior of compositionally graded Mo-enriched stellite 6 coatings with a Ni-based buffer layer via a novel laser cladding technique
errJournal of Materials Science
IF3.9
err2026-10-01
err0
PREAI
errV. Tiwari; A. Tyagi; A. Kumar; K. Mondal; M. K. Singh; S. Kapil; S. S. Singh
errShare
errSave
Effect of Indium and Nickel on Impact Toughness of Sn–0.7Cu Solder: Interplay of Solubility, Phase Configuration, and an Improved Ductile-to-Brittle Transition Temperature Analysis
errAdvanced Engineering Materials
IF3.3
err2026-09-21
err0
PREAI
errAyushi Thakur; Subha Sanket Panda; Sudhanshu Shekhar Singh; Jayant Jain; Sangeeta Santra
errShare
errSave
Microstructure and enhanced high temperature oxidation behavior of TiC-reinforced stellite 6 metal matrix composite coatings via laser cladding additive manufacturing
errJournal of Alloys and Compounds
IF6.3
err2026-09-02
err0
PREAI
errVikas Tiwari; Moloy Sarkar; Vijay Mandal; Janakarajan Ramkumar; K. Mondal; Sudhanshu S. Singh
errShare
errSave
Correction: Influence of Sn and Al contents on the microstructure evolution and mechanical performance of stir-cast Mg-3.0Al-0.5Si alloy
errJournal of Materials Science
IF3.9
err2026-05-17
err0
PREAI
errAlok Kumar Nanda; Pankaj Kumar; Palash Poddar; J. Sivasubramanian; Anindya Basu; Gaurav Gupta; Sudhanshu Shekhar Singh; Manoj Gupta; Sourav Ganguly
errShare
errSave
Synergy of cellular architecture and dual-precipitation on the high-cycle fatigue mechanisms of an additively manufactured high-entropy alloy: Al0.2Co1.5CrFeNi1.5Ti0.3
errMaterialia
IF2.9
err2026-05-01
err0
PREAI
errPoresh Kumar; Tu-Ngoc Lam; Jing-Syuan Lai; Lia Amalia; Po-heng Chou; An-Chou Yeh; Winson C.H. Kuo; Peter K. Liaw; Ching-Yu Chiang; Wan-Zhen Hsieh; Ke An; Yan Chen; Dunji Yu; Sudhanshu Shekhar Singh; E-Wen Huang
errShare
errSave
Tuning substrate temperature for improved adhesion and mechanical properties of magnetron sputtered high entropy alloy thin-films
errThin Solid Films
IF2
err2025-12-01
err0
PREAI
errSubhakar, M.; Pandey, L.; Chaudhary, S.; Jaiswal, S. P.; Singh, S. S.; Mahmud, U.; Chiu, Y. L.; Jones, I. P.; Jain, J.
errShare
errSave
Elevated atmospheric CO2 enhances submergence tolerance in Sub1 introgressed rice varieties and their recurrent parents
errPlant Physiology and Biochemistry
IF5.7
err2025-11-13
err0
PREAI
errAnjani Kumar; A.K. Nayak; Sangita Mohanty; Koushik Chakraborty; Rameswar Prasad Sah; Rahul Tripathi; P. Panneerselvam; Abhishek Kumar Sahu; Arvind Yadav; Biswajit Behera; Ajay Kumar Mishra; Ashish K. Srivastava; Sheetal Sharma; Sudhanshu Singh
errShare
errSave
Hot deformation behavior and processing map development of Al0.3Co1.5CrFeNi1.5Ti0.2 high-entropy alloy: Mechanisms and microstructural evolution
errIntermetallics
IF4.8
err2025-11-07
err0
PREAI
errBushra Harun; Ranjeet Kumar; Shubham Jaiswal; E-Wen Huang; Yao-Jen Chang; An-Chou Yeh; Sudhanshu Shekhar Singh; Suresh Neelakantan; Jayant Jain
errShare
errSave
Correction: Interactions of insect pests; diseases; and Sub1 rice varieties across agro-climatic zones in Assam: insights for strengthening resilient rice cultivation
errFrontiers in Sustainable Food Systems
IF3.1
err2025-10-07
err0
errOAAI
errThanga Suja Srinivasan†; Panneerselvam Peramaiyan; Ainara Peñalver-Cruz; Suryakanta Khandai; Vipin Kumar; Vivek Kumar; Mrinal Saikia; Kalyan Pathak; Rupam Borgohain; Kanwar Singh; Shabrin Sultana Ahmed; Gayatree Goswami; Jutika Das; Virendar Kumar; Sudhanshu Singh; Ashok Bhattacharyya
errShare
errSave
Powder bed fusion processing and tribological evaluation of Stellite 6 reinforced tungsten heavy alloys
errInternational Journal of Refractory Metals and Hard Materials
IF4.6
err2025-10-05
err0
PREAI
errNavindra Shekhar Shakunt; Vikas Tiwari; Moloy Sarkar; Ponnapureddy Shiven; Bhagyaraj Jayabalan; Subrata Mukherjee; Janakarajan Ramkumar; Kantesh Balani; Sudhanshu Shekhar Singh; Madhumanti Bhattacharyya
errShare
errSave
Thermal Stabilization of Nanocrystalline Nickel Through Minor Tin Addition
errJOM
IF2.3
err2025-10-01
err0
PREAI
errJangid, Alka; Ghosh, Pradipta; Singh, Sudhanshu Shekhar; Badwe, Nilesh
errShare
errSave
In Situ Investigation of Microscale Deformation Mechanisms of Individual Phases in Silicon Stainless Steel with Varied Si Content
errSTEEL RESEARCH INTERNATIONAL
IF2.5
err2025-10-01
err0
PREAI
errSetia, Prince; Tripathi, Nikhil; Gupta, Aman; Rawat, Pankaj; Kumar, Mirtunjay; Sahu, Sandeep; Singh, Sudhanshu S.; Venkateswaran, Thiruvenkatam; Shekhar, Shashank
errShare
errSave
Microstructure and enhanced high-temperature wear properties of TiC reinforced Co-Cr-W metal matrix composite (MMC) coatings fabricated by laser cladding
errJournal of Alloys and Compounds
IF6.3
err2025-09-08
err0
PREAI
errV. Tiwari; A. Kumar; M. Sarkar; J. Ramkumar; M. Gupta; K. Mondal; J. Jain; M.K. Singh; S.S. Singh
errShare
errSave
Development of a simulated marine environment device for studying the simulated splash zone corrosion behavior of materials
errOcean Engineering
IF5.5
err2025-07-25
err0
PREAI
errK. Vishwanath; S.S. Singh; K. Mondal
errShare
errSave
Friction and wear maps of Mg-Er alloys with varying Er content
errTRIBOLOGY INTERNATIONAL
IF6.9
err2025-02-01
err0
PREAI
errRashi, R.; Lee, Soo Yeol; Singh, Sudhanshu S.; Chiu, Y. L.; Jones, I. P.; Jain, Jayant
errShare
errSave
Deformation characteristics of Ti-Ni-Fe based multiphase intermetallic: Experiments and atomistic simulation
errJOURNAL OF ALLOYS AND COMPOUNDS
IF6.3
err2025-01-01
err1
PREAI
errPanda, Subha S.; Sahni, Sandeep; Jayabalan, Bhagyaraj; Subhakar, M.; Mukherjee, Subrata; Jain, Jayant; Singh, Sudhanshu S.
errShare
errSave
Enhanced mechanical properties and microstructure of TiC reinforced Stellite 6 metal matrix composites (MMCs) via laser cladding additive manufacturing
errJOURNAL OF ALLOYS AND COMPOUNDS
IF6.3
err2025-01-01
err1
PREAI
errTiwari, V.; Mandal, V.; Sarkar, M.; Kumar, A.; Bhagyaraj, J.; Singh, Manjesh K.; Mukherjee, S.; Mondal, K.; Ramkumar, J.; Jain, J.; Huang, E. -Wen; Singh, S. S.
errShare
errSave
High-Temperature Hardness Anomaly in Ti-Ni-Fe-Based Multiphase Intermetallic
errADVANCED ENGINEERING MATERIALS
IF3.3
err2024-12-12
err0
PREAI
errPanda, Subha S.; Sahni, Sandeep; Mangam, Subhakar; Jayabalan, Bhagyaraj; Mukherjee, Subrata; Jain, Jayant; Singh, Sudhanshu S.
errShare
errSave
Tension-compression asymmetry in Ti50Ni45Fe5 B2 intermetallic
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2024-10-01
err0
PREAI
errPanda, Subha S.; Jayabalan, Bhagyaraj; Prasad, Amit Kumar; Mukherjee, Subrata; Jain, Jayant; Singh, Sudhanshu Shekhar
errShare
errSave
An insight to wetting and joining of HfB2 and ZrB2 based ultra high temperature ceramics: A review
errCHEMICAL ENGINEERING JOURNAL
IF13.2
err2024-09-01
err0
PREAI
errBajpai, Shipra; Dubey, Shruti; Venkateswaran, T.; Singh, Sudhanshu S.; Balani, Kantesh
errShare
errSave

Research Directions

The data has not been retrieved yet.
Co-authors
Cooperation Journals
P
Peter K. Liaw
H-index: 121 · Papers: 1.5K
J
J. K. Ladha
H-index: 90 · Papers: 352
J
Javier LLorca
H-index: 85 · Papers: 522
A
Abdelbagi M. Ismail
H-index: 75 · Papers: 240
K
Ke An
H-index: 74 · Papers: 575
View more