logo
CanyamAI summaries for academic research
language
MobileMobile
  • Phone FeatureWeChat Mini Program
EnglishEnglish
noticeNotice
BlogBlog
delete
arrow
Back
X

Xuming Su

hangzhou city university

35H-index
186Paper Count
3.7KCitation Count
Published Papers 62
Publication Date
logo
VHCF Behavior of SLM AlSi10Mg: Impact of Dual-Laser Strategy and Fatigue Life Prediction
errFATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
IF3.2
err2025-12-01
err0
PREAI
errLi, Wenkai; Jing, Yu; Shi, Lei; Shi, Yandong; Shi, Liting; Su, Xuming
errShare
errSave
Fabrication and Parameter Optimization of High-Melting-Point Pure Cr by Binder Jetting Additive Manufacturing
errCRYSTALS
IF2.4
err2025-11-24
err1
errOAAI
errShan, Liyuan; Shi, Yandong; Su, Xuming; Li, Wenkai; Liu, Caiming
errShare
errSave
Effect of overlap scanning strategies on micro-characteristics and mechanical properties of dual-laser selective laser melted AlSi10Mg
errMaterials Today Communications
IF4.5
err2025-09-03
err0
PREAI
errYandong Shi; Aoqi Wu; Liyuan Shan; Fan Jiang; Liting Shi; Wenkai Li; Xuming Su
errShare
errSave
Crack mitigation in selective laser melting of CM247LC superalloy via post-heating laser tracks: Influence on microstructure and cracking behavior
errMATERIALS CHARACTERIZATION
IF5.5
err2025-07-01
err0
PREAI
errShi, Yandong; Wu, Aoqi; Li, Siwei; Shi, Lei; Lei, Liming; Shi, Liting; Li, Wenkai; Su, Xuming
errShare
errSave
Effect of loading configuration on tensile and fatigue behavior of dissimilar resistance spot welds of selective laser-melted maraging steels
errINTERNATIONAL JOURNAL OF FATIGUE
IF6.8
err2025-05-09
err0
PREAI
errShi, Liting; Li, Wenkai; Li, Siwei; Shi, Yandong; Jiang, Fan; Zhou, Zhaofeng; Su, Xuming
errShare
errSave
Effects of linear energy density on melt pool and microstructure of selective laser melted AlSi10Mg: An experimental and numerical study
errMATERIALS TODAY COMMUNICATIONS
IF4.5
err2025-02-01
err0
PREAI
errWu, Aoqi; Shi, Yandong; Jing, Yu; Li, Siwei; Li, Wenkai; Su, Xuming
errShare
errSave
A 2-D fabric anisotropic hyperelastic constitutive model based on micromechanics analysis
errINTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
IF9.4
err2024-11-01
err0
PREAI
errSong, Zengrui; Tian, Yuanhao; Ning, Huiming; Hu, Ning; Zhao, Libin; Gong, Youkun; Liu, Feng; Wu, Xiaopeng; Xiang, Chenxing; Wen, Jie; Wang, Shu; Su, Xuming; Zhang, Weizhao
errShare
errSave
Uniaxial and multiaxial cyclic deformation behavior prediction of Z2CN18.10 austenitic stainless steel based on Transformer deep learning method
errINTERNATIONAL JOURNAL OF FATIGUE
IF6.8
err2024-09-01
err2
PREAI
errLiu, Caiming; Chen, Xu; Chen, Weiqiu; Shi, Liting; Li, Wenkai; Su, Xuming; Shi, Yandong
errShare
errSave
The whole-life ratcheting behavior of internal pressurized elbow subjected to force and displacement cycling with a damage-coupled kinematic hardening model
errINTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
IF3.5
err2024-06-01
err1
PREAI
errLiu, Caiming; Chen, Xu; Chen, Weiqiu; Shan, Liyuan; Su, Xuming; Zhu, Xinyue
errShare
errSave
Ratcheting-fatigue behavior and life prediction of Z2CN18.10 austenitic stainless steel elbow
errINTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
IF3.5
err2023-08-01
err5
PREAI
errLiu, Caiming; Chen, Xu; Chen, Weiqiu; Shi, Liting; Su, Xuming; Ogunmola, Oluwadamilola; Shan, Liyuan
errShare
errSave
Fatigue properties of resistance spot-welded maraging steel produced by selective laser melting
errFATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
IF3.2
err2023-03-21
err1
PREAI
errShi, Yandong; Luo, Cheng; Li, Wenkai; Shi, Liting; Zhang, Yansong; Su, Xuming
errShare
errSave
Characterization and modeling of fatigue behavior of chopped glass fiber reinforced sheet molding compound (SMC) composite
errINTERNATIONAL JOURNAL OF FATIGUE
IF6.8
err2022-03-01
err12
PREAI
errSun, Xuze; Li, Yang; Engler-Pinto, Carlos; Huang, Li; Huang, Shiyao; Li, Ziang; Tang, Haibin; Bao, Zuguo; Cui, Haitao; Zeng, Danielle; Su, Xuming; Han, Weijian
errShare
errSave
Experimental and computational analysis of bending fatigue failure in chopped carbon fiber chip reinforced composites
errCOMPOSITE STRUCTURES
IF7.1
err2021-11-01
err4
errOAAI
errTang, Haibin; Zhou, Guowei; Sun, Qingping; Avinesh, Ojha; Meng, Zhaoxu; Engler-Pinto, Carlos; Su, Xuming
errShare
errSave
Longitudinal compression failure of 3D printed continuous carbon fiber reinforced composites: An experimental and computational study
errCOMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
IF8.9
err2021-07-01
err36
PREAI
errTang, Haibin; Sun, Qingping; Li, Ziang; Su, Xuming; Yan, Wentao
errShare
errSave
A combined experimental and computational analysis of failure mechanisms in open-hole cross-ply laminates under flexural loading
errCOMPOSITES PART B-ENGINEERING
IF14.2
err2021-06-01
err16
errOAAI
errSun, Qingping; Zhou, Guowei; Tang, Haibin; Chen, Zhangxing; Fenner, Joel; Meng, Zhaoxu; Jain, Mukesh; Su, Xuming
errShare
errSave
In-situ effect in cross-ply laminates under various loading conditions analyzed with hybrid macro/micro-scale computational models
errCOMPOSITE STRUCTURES
IF7.1
err2021-04-01
err17
errOAAI
errSun, Qingping; Zhou, Guowei; Tang, Haibin; Meng, Zhaoxu; Jain, Mukesh; Su, Xuming; Han, Weijian
errShare
errSave
Process-structure-property analysis of short carbon fiber reinforced polymer composite via fused filament fabrication
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2021-04-01
err31
PREAI
errPei, Shenli; Wang, Kaifeng; Chen, Cheng-Bang; Li, Jingjing; Li, Yang; Zeng, Danielle; Su, Xuming; Yang, Hui
errShare
errSave
Analysis of the crushing behaviors of woven carbon fiber reinforced plastic hat section component under dynamic bending and axial crushing loading
errTHIN-WALLED STRUCTURES
IF6.6
err2021-04-01
err13
errOAAI
errZhou, Guowei; Tang, Haibin; Sun, Qingping; Li, Dayong; Peng, Yinghong; Zeng, Danielle; Su, Xuming
errShare
errSave
Stochastic nonlinear analysis of unidirectional fiber composites using image-based microstructural uncertainty quantification
errCOMPOSITE STRUCTURES
IF7.1
err2021-03-01
err15
errOAAI
errHuang, Tianyu; Gao, Jiaying; Sun, Qingping; Zeng, Danielle; Su, Xuming; Liu, Wing Kam; Chen, Wei
errShare
errSave
Effect of residual stress on fatigue strength of 316L stainless steel produced by laser powder bed fusion process
errPROGRESS IN ADDITIVE MANUFACTURING
IF5.4
err2021-02-09
err35
PREAI
errLai, Wei-Jen; Ojha, Avinesh; Li, Ziang; Engler-Pinto, Carlos; Su, Xuming
errShare
errSave

Research Directions

No research directions
Co-authors
Cooperation Journals
W
Wing Kam Liu
H-index: 98 · Papers: 523
J
Jian Cao
H-index: 87 · Papers: 729
胡
胡宁 (Ning Hu)
H-index: 82 · Papers: 1.2K
Z
Zhangxin Chen
H-index: 76 · Papers: 1.5K
W
Weiqiu Chen
H-index: 72 · Papers: 836
View more