logo
CanyamAI summaries for academic research
language
MobileMobile
  • Phone FeatureWeChat Mini Program
EnglishEnglish
noticeNotice
BlogBlog
delete
arrow
Back
J

Jorge F. dos Santos

pacific northwest national laboratory

59H-index
435Paper Count
1.2WCitation Count
Published Papers 151
Publication Date
logo
Investigating the thermal history, microstructure evolution, and mechanical properties during friction surfacing layer deposition of a NiCoFeCrCu high-entropy alloy
errProgress in Additive Manufacturing
IF5.4
err2026-03-26
err0
PREAI
errDavid Garcia; Tianhao Wang; Subhashish Meher; Mohan S. K. K. Y. Nartu; Nicole R. Overman; Jorge F. dos Santos; Isabella J. van Rooyen
errShare
errSave
Friction consolidation as a sustainable circular manufacturing solution for critical mineral recovery in IN617 and A709 alloys
errMaterialia
IF2.9
err2026-02-23
err0
PREAI
errSubhashish Meher; Tianhao Wang; Mohan Sai Kiran Kumar Yadav Nartu; David Garcia; Chinthaka M Silva; Jorge F dos Santos; Isabella J. van Rooyen
errShare
errSave
Structural uniformity and compositional homogeneity of solid-phase alloyed rod
errJournal of Materials Research and Technology
IF6.6
err2026-02-16
err0
errOAAI
errAkash Mukhopadhyay; Julian D. Escobar; Lei Li; Michael J. Holden; Sridhar Niverty; Tianhao Wang; Teresa L. Lemmon; Jorge F. dos Santos; Ayoub Soulami; Xiao Li
errShare
errSave
Friction stir welding of the dissimilar materials AA6082 and AISI316 for marine applications
errINTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
IF3.1
err2025-05-17
err0
errOAAI
errBergmann, Luciano; Mello Callil, Victor; Meirelles Azevedo Gomes, Eduardo Vitor; Igor Lourenco De Souza, Marcelo; Caprace, Jean-David; dos Santos, Jorge Fernandez; Bergmann, Jean Pierre; Klusemann, Benjamin
errShare
errSave
Improving mechanical properties of constrained friction processing Mg-Zn-Ca alloys by modifying texture using multiple pass processing
errJOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
IF14.3
err2025-04-24
err0
errOAAI
errChen, Ting; Fu, Banglong; Suhuddin, Uceu F. H. R.; Shen, Tong; Li, Gaohui; Maawad, Emad; Shen, Junjun; dos Santos, Jorge F.; Bergmann, Jean Pierre; Klusemann, Benjamin
errShare
errSave
Friction surface layer deposition of triple-phase Al10Cr12Fe35Mn23Ni20 high entropy alloy: Process optimization and microstructural evolution
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2025-04-01
err0
PREAI
errNartu, Mohan Sai Kiran Kumar Yadav; Garcia, David; Meher, Subhashish; Wang, Tianhao; Dos Santos, Jorge F.; Van Rooyen, Isabella
errShare
errSave
Critical mineral substitutions in IN617: A combined computational and experimental approach to performance evaluation and feasibility
errMATERIALIA
IF2.9
err2025-03-01
err0
PREAI
errRoy, Ankit; Burns, Carolyne; Livers, Steven; Lund, Benjamin; Meher, Subhashish; Nartu, Mohan Sai Kiran Kumar Yadav; Mahmud, Asif; Wang, Tianhao; Garcia, David; Dos Santos, Jorge; Meher, Pratikshya; Silva, Chinthaka M.; Hartmann, Thomas; Rooyen, Isabella J. Van
errShare
errSave
Upcycled high-strength aluminum alloys from scrap through solid-phase alloying
errNATURE COMMUNICATIONS
IF15.7
err2024-12-10
err0
errOAAI
errWang, Tianhao; Li, Xiao; Li, Zehao; Liu, Tingkun; Wang, Xiang; Devaraj, Arun; Powell, Cindy A.; dos Santos, Jorge F.
errShare
errSave
A dislocation density-based meshfree computational framework for solid phase processing
errINTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
IF9.4
err2024-04-01
err6
errOAAI
errLi, Lei; Escobar, Julian D.; Das, Hrishikesh; Shukla, Shivakant; Schuessler, Benjamin J.; Overman, Nicole R.; Grant, Glenn J.; Mathaudhu, Suveen N.; Santos, Jorge F. Dos; Powell, Cynthia A.; Soulami, Ayoub
errShare
errSave
Application of novel constrained friction processing method to produce fine grained biomedical Mg-Zn-Ca alloy
errJOURNAL OF MAGNESIUM AND ALLOYS
IF13.8
err2024-02-01
err3
errOAAI
errChen, Ting; Fu, Banglong; Shen, Junjun; Suhuddin, Uceu F. H. R.; Wiese, Bjoern; Huang, Yuanding; Wang, Min; dos Santos, Jorge F.; Bergmann, Jean Pierre; Klusemann, Benjamin
errShare
errSave
Numerical investigation of the influence of friction stir welding parameters on the microstructure of AISI 410S ferritic stainless steel joints
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2023-11-01
err4
errOAAI
errSilva, Y. C.; Andrade, T. C.; Oliveira Junior, F. J. V.; Sousa, A. B. F.; dos Santos, Jorge F.; Marcondes, F.; Miranda, H. C.; Silva, C. C.
errShare
errSave
Process parameter assessment on the dissimilar deposition of AA2024-T351 on AA7475-T761 by friction surfacing
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2023-11-01
err2
errOAAI
errBrandes, A. C.; Roos, A.; Klusemann, B.; Martins, J. P.; dos Santos, J. F.; Carvalho, A. L. M.
errShare
errSave
Microstructural development of as-cast AM50 during Constrained Friction Processing: Grain refinement and influence of process parameters
errJOURNAL OF MATERIALS PROCESSING TECHNOLOGY
IF7.5
err2023-09-01
err5
PREAI
errde Castro, Camila Caroline; Shen, Junjun; dos Santos, Jorge Fernandez; Klusemann, Benjamin
errShare
errSave
Rapid grain refinement and compositional homogenization in a cast binary Cu50Ni alloy achieved by friction stir processing
errMATERIALS CHARACTERIZATION
IF5.5
err2023-08-01
err2
PREAI
errEscobar, Julian; Gwalani, Bharat; Silverstein, Joshua; Ajantiwalay, Tanvi; Roach, Christian; Bergmann, Luciano; dos Santos, Jorge F.; Maawad, Emad; Klusemann, Benjamin; Devaraj, Arun
errShare
errSave
Semi-stationary shoulder bobbin-tool: A new approach in tailoring macrostructure and mechanical properties of bobbin-tool friction stir welds in magnesium alloy
errJOURNAL OF MATERIALS PROCESSING TECHNOLOGY
IF7.5
err2023-08-01
err7
PREAI
errLi, Gaohui; Chen, Ting; Fu, Banglong; Shen, Junjun; Bergmann, Luciano; Zhou, Li; Chen, Ke; dos Santos, Jorge F.; Klusemann, Benjamin
errShare
errSave
Fatigue behaviour of multi-spot joints of 2024-T3 aluminium sheets obtained by refill Friction Stir Spot Welding with polysulfide sealant
errINTERNATIONAL JOURNAL OF FATIGUE
IF6.8
err2023-07-01
err6
PREAI
errBernardi, Matteo; Suhuddin, Uceu F. H.; Fu, Banglong; Gerber, Juliano P.; Bianchi, Mateus; Ostrovsky, Ilya; Sievers, Bjoern; Faes, Koen; Maawad, Emad; Lazzeri, Luigi; dos Santos, Jorge F.; Klusemann, Benjamin
errShare
errSave
Quasi-in-situ observation of microstructure at the friction interface: Shear deformation, dynamic recrystallization and mechanical responses during friction welding process
errMATERIALS CHARACTERIZATION
IF5.5
err2023-06-01
err2
PREAI
errJin, Feng; Fu, Banglong; Shen, Junjun; Li, Jinglong; Li, Wenya; dos Santos, Jorge F.; Klusemann, Benjamin
errShare
errSave
Effects of semi-solid structure on interface formation of dissimilar aluminum to galvanized steel welds produced by load-controlled Refill Friction Stir Spot Welding
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2022-12-01
err10
PREAI
errFerrari, V. R.; Coury, F. G.; Suhuddin, U. F. H.; Alcantara, N. G.; dos Santos, J. F.; Ohashi, R.; Fujimoto, M.; Koga, G. Y.
errShare
errSave
Heterogenous activation of dynamic recrystallization and twinning during friction stir processing of a Cu-4Nb alloy
errJOURNAL OF ALLOYS AND COMPOUNDS
IF6.3
err2022-12-01
err5
errOAAI
errEscobar, Julian; Gwalani, Bharat; Olszta, Matthew; Silverstein, Joshua; Ajantiwalay, Tanvi; Overman, Nicole; Fu, Wenkai; Li, Yulan; Bergmann, Luciano; Maawad, Emad; Klusemann, Benjamin; Santos, Jorge F. dos; Devaraj, Arun
errShare
errSave
Comparing the fatigue performance of Ti-4Al-0.005B titanium alloy T-joints, welded via different friction stir welding sequences
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2022-11-01
err11
PREAI
errSu, Yu; Li, Wenya; Shen, Junjun; Bergmann, Luciano; dos Santos, Jorge F.; Klusemann, Benjamin; Vairis, Achilles
errShare
errSave

Research Directions

No research directions
Co-authors
Cooperation Journals
D
Dierk Raabe
H-index: 178 · Papers: 2.3K
M
Mikhail L. Zheludkevich
H-index: 90 · Papers: 521
L
Lucas F. M. da Silva
H-index: 81 · Papers: 933
G
Gunther Eggeler
H-index: 76 · Papers: 742
W
Wenya Li
H-index: 76 · Papers: 820
View more