logo
CanyamAI summaries for academic research
language
MobileMobile
  • Phone FeatureWeChat Mini Program
EnglishEnglish
noticeNotice
BlogBlog
delete
arrow
Back
S

Sung Hyuk Park

Kyungpook National University

54H-index
239Paper Count
8.8KCitation Count
Published Papers 184
Publication Date
logo
Mechanism of Al-induced fracture-mode transition and ductility enhancement in high-speed-extruded Mg–Bi alloys
errJournal of Alloys and Compounds
IF6.3
err2026-08-19
err0
PREAI
errGun Woong An; Seoung-yooun Yu; To Hai Ha Nguyen; Jeong Hong Ha; Hui Yu; Sung Hyuk Park
errShare
errSave
Scanning-path-dependent surface topography and texture governing bending properties in rolled AZ31 magnesium alloy after ultrasonic nanocrystal surface modification and annealing
errJournal of Materials Research and Technology-JMR&T
IF6.6
err2026-07-28
err0
errOAAI
errGun Woong An; Seoung-yooun Yu; Sung Hyuk Park
errShare
errSave
Low-cycle fatigue behavior of extruded SEN6 magnesium alloy: extrusion-temperature dependence and energy-based life prediction
errInternational Journal of Fatigue
IF6.8
err2026-07-22
err0
PREAI
errHyung Jun Kim; Gun Woong An; Seoung-yooun Yu; Je Hyeong An; Jun Ho Bae; Sung Hyuk Park
errShare
errSave
Effect of Al content on microstructural characteristics and tensile properties of extruded Mg–Al–Zn–Ca–Y alloy sheets
errJournal of Magnesium and Alloys
IF13.8
err2026-06-12
err0
errOAAI
errJe Hyeong An; Gun Woong An; Hyung Jun Kim; Joung Sik Suh; Jun Ho Bae; Sung Hyuk Park
errShare
errSave
Microstructural evolution and hardness of bicontinuous Mg–Ti composites produced by liquid metal dealloying: effects of temperature and immersion time
errJournal of Alloys and Compounds
IF6.3
err2026-05-28
err0
PREAI
errHyun Jun Youn; Jee Eun Jang; Bo Hyun Park; Soo-Hyun Joo; Young Min Kim; Jongbin Go; Sung Hyuk Park
errShare
errSave
Influence of extrusion ratio on dynamic recrystallization, microstructural evolution, and mechanical properties of Mg–5Bi–3Al alloy
errJournal of Magnesium and Alloys
IF13.8
err2026-05-22
err0
errOAAI
errGun Woong An; Sang-Cheol Jin; Hui Yu; Jeong Hong Ha; Sung Hyuk Park
errShare
errSave
Enhanced microstructural homogeneity and tensile properties of bimodal AZ31 alloy sheet via combined ultrasonic nanocrystal surface modification and electropulsing treatment
errJournal of Magnesium and Alloys
IF13.8
err2026-04-22
err0
errOAAI
errWon Pyo Hong; Hyun Ji Kim; Taekyung Lee; Jongbin Go; Sung Hyuk Park
errShare
errSave
Influence of ultrasonic nanocrystalline surface modification on age-hardening kinetics and precipitation behavior in extruded AZ91 magnesium alloy
errJournal of Alloys and Compounds
IF6.3
err2026-04-04
err0
PREAI
errHyun Ji Kim; Won Pyo Hong; Auezhan Amanov; Hui Yu; Taekyung Lee; Young Min Kim; Sung Hyuk Park
errShare
errSave
Effect of Ca content in Mg melt on dealloying kinetics and microstructural evolution of Mg–Ti composites fabricated via liquid metal dealloying
errJournal of Magnesium and Alloys
IF13.8
err2026-03-30
err0
errOAAI
errJee Eun Jang; Bo Hyun Park; Hyun Jun Youn; In-Chul Choi; Soo-Hyun Joo; Sung Hyuk Park
errShare
errSave
Rolling reduction–dependent microstructural and texture evolution in AZ31 Mg alloy with a tilted basal texture during high-speed rolling
errJournal of Alloys and Compounds
IF6.3
err2026-03-23
err0
PREAI
errSeoung-yooun Yu; Su Jin Lee; Hui Yu; Jeong Hun Lee; Sung Hyuk Park
errShare
errSave
Effect of Zn addition to Mg melt on microstructural characteristics of Mg–Ti composites fabricated via liquid metal dealloying
errJournal of Magnesium and Alloys
IF13.8
err2026-03-17
err0
errOAAI
errJee Eun Jang; Bo Hyun Park; Hyun Jun Youn; Wei-li Cheng; Soo-Hyun Joo; Sung Hyuk Park
errShare
errSave
Novel lean Mg-Ag anodes designed through surface voltage potential difference for high-performance Mg-air battery
errCorrosion Communications
IF9.5
err2026-03-01
err3
PREAI
errCheng, Wei-li; Hao, Xu-bang; Shangguan, Fei-er; Li, Jian; Wang, Jin-hui; Yu, Hui; Wang, Li-fei; Cui, Ze-qin; Park, Sung Hyuk; Chang, Cheng
errShare
errSave
Grain refinement and enhanced mechanical properties of rolled and annealed Mg–3Al alloy through trace Ca addition
errJournal of Magnesium and Alloys
IF13.8
err2026-02-12
err0
errOAAI
errHyung Jun Kim; Seoung-yooun Yu; Gun Woong An; Hyun Ji Kim; Jiehua Li; Sung Hyuk Park
errShare
errSave
Damping behavior of as-extruded pure Mg and Mg-Bi binary alloys
errJournal of Magnesium and Alloys
IF13.8
err2026-02-12
err0
errOAAI
errC. Liu; H. Yu; Z.X. He; W. Yu; H.Y. Ma; Q.Z. Wang; Y.L. Xu; Q. Xu; S.H. Park; F.X. Yin
errShare
errSave
Validating the athermal contribution of electropulsing treatment utilizing T-type Mg specimen
errJournal of Magnesium and Alloys
IF13.8
err2025-12-08
err0
errOAAI
errJong Han Song; Seung Yeop Lee; Seho Cheon; Seong Ho Lee; Jinyeong Yu; Seunghun Baek; Jeongkyun Roh; Sung Hyuk Park; Taekyung Lee
errShare
errSave
Enhancing the dealloying kinetics and microstructural control of Mg–Ti composites through Ca addition to the Mg melt
errJournal of Materials Research and Technology
IF6.6
err2025-12-06
err0
errOAAI
errJee Eun Jang; Bo Hyun Park; Youn Hyun Jun; Soo-Hyun Joo; Sung Hyuk Park
errShare
errSave
Effect of Al content on the microstructural characteristics and tensile and fatigue properties of extruded SEN Mg alloys
errJournal of Magnesium and Alloys
IF13.8
err2025-11-11
err0
errOAAI
errJi-Yoon Lee; Je Hyeong An; Hyung Jun Kim; Jun Ho Bae; Joung Sik Suh; Taekyung Lee; Sung Hyuk Park
errShare
errSave
Advancing constitutive analysis of the hot deformation behavior of Ti–3Al–8V–6Cr–4Mo–4Zr via physics-aided machine learning
errJournal of Materials Research and Technology
IF6.6
err2025-10-27
err0
errOAAI
errSeong Ho Lee; Cholong Lee; YoonGyeong Ro; Sung Hyuk Park; Jang Woong Jo; Chong Soo Lee; Taekyung Lee
errShare
errSave
Effects of alloying elements (X: Zr, Nb, Ta, Mo, and Si) in the (Ti47.5X2.5)Cu50 precursor alloy on the microstructure, mechanical properties, and corrosion resistance of 3D interconnected Mg–Ti composites synthesized using liquid metal dealloying
errJournal of Materials Research and Technology
IF6.6
err2025-10-14
err0
errOAAI
errJihye Seong; Jee Eun Jang; Hidemi Kato; Sung Hyuk Park; Soo-Hyun Joo
errShare
errSave
Tailoring solidification and strength enhancement through process parameter optimization in Nb-added 316L stainless steel fabricated by directed energy deposition (DED)
errJournal of Materials Research and Technology
IF6.6
err2025-10-10
err0
errOAAI
errSoo Bin Han; Yoori Lee; Hojin Lee; Jin Seok Jang; Sung Hyuk Park; Hyejin Song
errShare
errSave

Research Directions

No research directions
Co-authors
Cooperation Journals
李娜 cover
李娜 (Na Li)
H-index: 122 · Papers: 2.5K
Hyoung Seop Kim cover
Hyoung Seop Kim (Hyoung Seop Kim)
H-index: 99 · Papers: 1.8K
H
Hu Young Jeong
H-index: 93 · Papers: 417
Y
Yoshihito Kawamura
H-index: 70 · Papers: 607
Y
Young‐Kook Lee
H-index: 64 · Papers: 478
View more