logo
CanyamAI summaries for academic research
language
MobileMobile
  • Phone FeatureWeChat Mini Program
EnglishEnglish
noticeNotice
BlogBlog
delete
arrow
Back
M

Mohammad Faseeulla Khan

king faisal university

13H-index
51Paper Count
694Citation Count
Published Papers 34
Publication Date
logo
Statistical Variability and Lower-Tail Performance Assessment of Tensile Properties in Flax, Jute, and Carbon Fiber Composite Laminates
errPolymers
IF4.9
err2026-08-12
err0
errOAAI
errSaurabh Tiwari; Jongwon Lee; Mohammad Faseeulla Khan; Nokeun Park
errShare
errSave
Slurry erosion behaviour of friction stir processed nickel aluminium bronze
errJournal of Materials Research and Technology-JMR&T
IF6.6
err2026-07-23
err0
errOAAI
errS. Annamalai; R. Damodaram; D. Ebenezer; B. Anand Ronald; R. Kumar; S. Saravanan; M.M. Sanjeev Ranga; E. Ganesh Ram; G.M. Karthik; Mohammad Faseeulla Khan
errShare
errSave
Effect of Build Orientation and Part Location on Surface Roughness of PA12 Components Fabricated by Selective Laser Sintering
errPolymers
IF4.9
err2026-06-06
err0
errOAAI
errLokeshwaran Srinivasan; Ezhilmaran Veeranan; Lalitha Radhakrishnan; Monaf Hodhod; Skander Jribi; Mohammad Faseeulla Khan
errShare
errSave
Multi-objective optimization of tribological performance in precipitation-hardened Custom 450 steel: A Gaussian Process Regression and NSGA-II Framework
errJournal of Materials Research and Technology
IF6.6
err2026-05-29
err0
errOAAI
errSyed Quadir Moinuddin; Karthick Muniyappan; Hariharasakthisudhan Ponnarengan; Logesh Kamaraj; Mohammad Faseeulla Khan; Saad Arif
errShare
errSave
A Review on Microstructure and Magnetic Property Control in Additively Manufactured Magnetic Materials
errAdvanced Engineering Materials
IF3.3
err2026-05-09
err0
PREAI
errSyed Quadir Moinuddin; Md Saad Patel; Suresh Goka; Mohammad Faseeulla Khan; Skander Jribi; Asim Alsharif
errShare
errSave
Development of metal matrix composites through solid-state additive friction deposition
errJournal of Materials Research and Technology
IF6.6
err2026-04-13
err0
errOAAI
errMohammad Faseeulla Khan; R. Damodaram; Md Saad Patel; G.D. Janaki Ram; G.M. Karthik
errShare
errSave
AZ91 Magnesium–Alumina Composites Drilling with Sustainable Coolants: Surface Roughness and Axial Thrust Force Using Neural-Guided Genetic Algorithms
errJournal of Materials Research and Technology
IF6.6
err2026-03-13
err0
errOAAI
errSyed Quadir Moinuddin; P. Hariharasakthisudhan; K. Logesh; K. Sathickbasha; Mohammad Faseeulla Khan; Hussain Altammar
errShare
errSave
Tribological behavior of Sr and Yb modified AZ91 magnesium alloy using machine learning prediction and multi-objective optimization for biomedical applications
errJournal of Materials Research and Technology-JMR&T
IF6.6
err2026-02-01
err1
errOAAI
errMoinuddin, Syed Quadir; Ponnarengan, Hariharasakthisudhan; Katiyar, Jitendra Kumar; Sathickbasha, K.; Khan, Mohammad Faseeulla; Niaz, Akbar
errShare
errSave
Correlation between heat treatment, microstructure, and mechanical properties of selective laser melted Co–Cr–Mo–W alloy
errMaterials Chemistry and Physics
IF4.7
err2026-01-29
err0
PREAI
errAlireza Derakhshi; Farhad Emdadi Derabi; Mostafa Aghazadeh Ghomi; Md Saad Patel; Faseeulla Khan Mohammad; Akbar Heidarzadeh
errShare
errSave
Process Optimization and Microstructural Characterization of Inconel 718 Fabricated via Wire Arc Additive Manufacturing
errJournal of Materials Engineering and Performance
IF2
err2026-01-01
err1
PREAI
errKishore, M.; Ezhilmaran, V.; Lokeshwaran, S.; Goud, Rajendra; Sathiaraj, G. Dan; Khan, Mohammad Faseeulla
errShare
errSave
Design of a Co, Cr, Ni and Ti reinforced AA7050 alloyed composite via solid-state thermomechanical processing
errJournal of Materials Research and Technology
IF6.6
err2025-12-08
err0
errOAAI
errShashwat Yadav; Deepanjali Rajput; Namrata Gangil; Mohammad Faseeulla Khan; Hussain Altammar; Mohammed.E. Ali Mohsin; Suleiman Mousa; Arshad Noor Siddiquee
errShare
errSave
Microstructural evolution and globularization in additively manufactured Ti-6Al-4V via cyclic heat treatment
errJOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
IF3.7
err2025-12-01
err0
PREAI
errKhorshidi, Mahsa; Heidarzadeh, Akbar; Mohammad, Faseeulla Khan; Syed, Quadir Moinuddin
errShare
errSave
Effect of Direct Aging Temperature on the Microstructure and Hardness of Multi-Pass Friction Stir Processed Additive Manufactured AlSi10Mg Aluminium Alloy
errJournal of Materials Research and Technology
IF6.6
err2025-11-13
err0
errOAAI
errAkbar Heidarzadeh; Mohammad Faseeulla Khan
errShare
errSave
From microstructure to hardness: influence of stacking fault energy on dislocation behavior in friction stir welded copper alloys
errJOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
IF3.7
err2025-11-01
err0
PREAI
errHeidarzadeh, Akbar; Faseeulla Khan, Mohammad
errShare
errSave
Strength–Ductility Synergy in Biodegradable Mg-Rare Earth Alloy Processed via Multi-Directional Forging
errJournal of Functional Biomaterials 2025, Vol. 16, Page 391
IF0
err2025-10-18
err0
errOAAI
errFaseeulla Khan Mohammad; Uzwalkiran Rokkala; Sohail M. A. K. Mohammed; Hussain Altammar; Syed Quadir Moinuddin; Raffi Mohammed
errShare
errSave
Tailoring the microstructure and mechanical properties of LPBF-fabricated AlSi10Mg alloy via combining friction stir processing and direct aging
errJournal of Materials Research and Technology
IF6.6
err2025-10-15
err0
errOAAI
errAkbar Heidarzadeh; Hussain Altammar; Mohammad Faseeulla Khan
errShare
errSave
Development of ultrafine-grained microstructure and texture evolution in aluminium graphite composites processed through accumulative roll bonding
errMaterials Letters
IF2.7
err2025-08-28
err0
PREAI
errAkash Biradar; Mohammad Faseeulla Khan; M. Rijesh
errShare
errSave
Effect of tool pin profiles on defects formation during friction stir welding of AA 6082-T6 straight-pipes-butt-weld joints
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2025-05-01
err0
errOAAI
errYadav, Jitendra; Gangil, Namrata; Siddiquee, Arshad Noor; Mohsin, Mohammed E. Ali; Alnamasi, Khaled; Moinuddin, Syed Quadir; Khan, Mohammad Faseeulla; Maheshwari, Sachin
errShare
errSave
Effect of Post-Weld Heat Treatment Cooling Strategies on Microstructure and Mechanical Properties of 0.3 C-Cr-Mo-V Steel Weld Joints Using GTAW Process
errMETALS
IF2.5
err2025-04-29
err0
errOAAI
errMoinuddin, Syed Quadir; Khan, Mohammad Faseeulla; Alnamasi, Khaled; Jribi, Skander; Radhakrishnan, K.; Hameed, Syed Shaul; Muralidharan, V.
errShare
errSave
Synergistic Effects of Thermal Cycles and Residual Stress on Microstructural Evolution and Mechanical Properties in Monel 400 and AISI 316L Weld Joints
errMETALS
IF2.5
err2025-04-22
err0
errOAAI
errYelamasetti, Balram; Sushma, Sri Phani; Mohammed, Zubairuddin; Altammar, Hussain; Khan, Mohammad Faseeulla
errShare
errSave

Research Directions

No research directions
Co-authors
Cooperation Journals
A
Arshad Noor Siddiquee
H-index: 46 · Papers: 353
G
G.D. Janaki Ram
H-index: 45 · Papers: 131
S
Sachin Maheshwari
H-index: 41 · Papers: 226
N
Nokeun Park
H-index: 39 · Papers: 183
S
S.K. Panigrahi
H-index: 39 · Papers: 91
View more