logo
CanyamAI summaries for academic research
language
MobileMobile
  • Phone FeatureWeChat Mini Program
EnglishEnglish
noticeNotice
BlogBlog
delete
arrow
Back
I

Irene Buj-Corral

universitat politecnica de catalunya

27H-index
130Paper Count
2.2KCitation Count
Published Papers 37
Publication Date
logo
Design and sterilization of 3D-printed glass-bottomed multiwells for cell culture and immunostaining
errApplied Microbiology and Biotechnology
IF4.3
err2026-09-17
err0
errOAAI
errSergio Noé; Francesc Barberá-Flichi; Héctor Sanz-Fraile; Jose Antonio Padilla; Ignasi Jorba; Irene Buj-Corral; Elena Xuriguera; Emilio Jiménez-Piqué; Núria Gavara
errShare
errSave
Editorial for Advances in 3D Printing Technologies of Metals—2nd Edition
errMetals
IF2.5
err2026-03-01
err0
errOAAI
errIrene Buj-Corral; Felip Fenollosa-Artés
errShare
errSave
Characterization of 3D-Printed Glass Fiber-Filled and Calcium Carbonate-Filled Polypropylene Components for Surgical Planning
errPolymers 2025, Vol. 17, Page 2684
IF4.9
err2025-10-04
err0
errOAAI
errNúria Adell-Gómez; Irene Buj-Corral; Miquel Domingo-Espin; Jordi Llumà; J. Antonio Travieso-Rodríguez; Josep Rubio-Palau; César García-Fontecha; Alejandro Domínguez-Fernández; Arnau Valls-Esteve
errShare
errSave
Selection of Network Parameters in Direct ANN Modeling of Roughness Obtained in FFF Processes
errPOLYMERS
IF4.9
err2025-01-06
err0
errOAAI
errBuj-Corral, Irene; Sivatte-Adroer, Maurici; Rodero-de-Lamo, Lourdes; Marco-Almagro, Lluis
errShare
errSave
Advanced Strategies for the Fabrication of Multi-Material Anatomical Models of Complex Pediatric Oncologic Cases
errBIOENGINEERING-BASEL
IF3.7
err2023-12-27
err4
errOAAI
errValls-Esteve, Arnau; Tejo-Otero, Aitor; Adell-Gomez, Nuria; Lustig-Gainza, Pamela; Fenollosa-Artes, Felip; Buj-Corral, Irene; Rubio-Palau, Josep; Munuera, Josep; Krauel, Lucas
errShare
errSave
Patient-Specific 3D Printed Soft Models for Liver Surgical Planning and Hands-On Training
errGELS
IF5.3
err2023-04-16
err14
errOAAI
errValls-Esteve, Arnau; Tejo-Otero, Aitor; Lustig-Gainza, Pamela; Buj-Corral, Irene; Fenollosa-Artes, Felip; Rubio-Palau, Josep; Barber-martinez de la Torre, Ignasi; Munuera, Josep; Fondevila, Constantino; Krauel, Lucas
errShare
errSave
Multi-objective optimization of tool wear, surface roughness, and material removal rate in finishing honing processes using adaptive neural fuzzy inference systems
errTRIBOLOGY INTERNATIONAL
IF6.9
err2023-04-01
err8
errOAAI
errBuj-Corral, Irene; Sender, Piotr; Luis-Perez, Carmelo J.
errShare
errSave
Comparative Study about Dimensional Accuracy and Surface Finish of Constant-Breadth Cams Manufactured by FFF and CNC Milling
errMICROMACHINES
IF3
err2023-02-02
err6
errOAAI
errZayas-Figueras, Enrique E.; Buj-Corral, Irene
errShare
errSave
Modeling of Surface Roughness in Honing Processes by Using Fuzzy Artificial Neural Networks
errJOURNAL OF MANUFACTURING AND MATERIALS PROCESSING
IF3.3
err2023-01-15
err4
errOAAI
errBuj-Corral, Irene; Sender, Piotr; Luis-Perez, Carmelo J.
errShare
errSave
Comparative study about dimensional accuracy and form errors of FFF printed spur gears using PLA and Nylon
errPOLYMER TESTING
IF6
err2023-01-01
err31
errOAAI
errBuj-Corral, Irene; Zayas-Figueras, Enrique Ernesto
errShare
errSave
3D Printing of Bioinert Oxide Ceramics for Medical Applications
errJOURNAL OF FUNCTIONAL BIOMATERIALS
IF5.2
err2022-09-17
err20
errOAAI
errBuj-Corral, Irene; Tejo-Otero, Aitor
errShare
errSave
Soft-Tissue-Mimicking Using Hydrogels for the Development of Phantoms
errGELS
IF5.3
err2022-01-06
err46
errOAAI
errTejo-Otero, Aitor; Fenollosa-Artes, Felip; Achaerandio, Isabel; Rey-Vinolas, Sergi; Buj-Corral, Irene; Mateos-Timoneda, Miguel angel; Engel, Elisabeth
errShare
errSave
Optimization and Sensitivity Analysis of the Cutting Conditions in Rough, Semi-Finish and Finish Honing
errMATERIALS
IF3.2
err2021-12-23
err8
errOAAI
errBuj-Corral, Irene; Rodero-de-Lamo, Lourdes; Marco-Almagro, Lluis
errShare
errSave
Characterization of 3D Printed Yttria-Stabilized Zirconia Parts for Use in Prostheses
errNANOMATERIALS
IF4.3
err2021-11-03
err23
errOAAI
errBuj-Corral, Irene; Vidal, Daniel; Tejo-Otero, Aitor; Antonio Padilla, Jose; Xuriguera, Elena; Fenollosa-Artes, Felip
errShare
errSave
Influence of Infill Pattern on the Elastic Mechanical Properties of Fused Filament Fabrication (FFF) Parts through Experimental Tests and Numerical Analyses
errMATERIALS
IF3.2
err2021-09-21
err17
errOAAI
errBonada, Jordi; Magdalena Pastor, Ma; Buj-Corral, Irene
errShare
errSave
Soft-tissue-mimicking using silicones for the manufacturing of soft phantoms by fresh 3D printing
errRAPID PROTOTYPING JOURNAL
IF3.6
err2021-09-02
err5
errOAAI
errTejo-Otero, Aitor; Colly, Arthur; Courtial, Edwin-Joffrey; Fenollosa-Artes, Felip; Buj-Corral, Irene; Marquette, Christophe A.
errShare
errSave
3D printed soft surgical planning prototype for a biliary tract rhabdomyosarcoma
errJOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS
IF3.5
err2020-09-01
err19
errOAAI
errTejo-Otero, A.; Lustig-Gainza, P.; Fenollosa-Artes, F.; Valls, A.; Krauel, L.; Buj-Corral, I.
errShare
errSave
Effect of Printing Parameters on Dimensional Error and Surface Roughness Obtained in Direct Ink Writing (DIW) Processes
errMATERIALS
IF3.2
err2020-05-07
err52
errOAAI
errBuj-Corral, Irene; Dominguez-Fernandez, Alejandro; Gomez-Gejo, Ana
errShare
errSave
Adaptive indirect neural network model for roughness in honing processes
errTRIBOLOGY INTERNATIONAL
IF6.9
err2020-01-01
err14
errOAAI
errBuj-Corral, Irene; Sivatte-Adroer, Maurici; Llanas-Parra, Xavier
errShare
errSave
Elastic Asymmetry of PLA Material in FDM-Printed Parts: Considerations Concerning Experimental Characterisation for Use in Numerical Simulations
errMATERIALS
IF3.2
err2019-12-18
err42
errOAAI
errPastor-Artigues, Ma-Magdalena; Roure-Fernandez, Francesc; Ayneto-Gubert, Xavier; Bonada-Bo, Jordi; Perez-Guindal, Elsa; Buj-Corral, Irene
errShare
errSave

Research Directions

The data has not been retrieved yet.
Co-authors
Cooperation Journals
C
Carlos Alemán
H-index: 57 · Papers: 834
C
Constantino Fondevila
H-index: 54 · Papers: 386
E
Elisabeth Engel
H-index: 44 · Papers: 159
E
Elaine Armelín
H-index: 43 · Papers: 220
C
Christophe A. Marquette
H-index: 42 · Papers: 293
View more