logo
CanyamAI summaries for academic research
language
MobileMobile
  • Phone FeatureWeChat Mini Program
EnglishEnglish
noticeNotice
BlogBlog
delete
arrow
Back
I

I.S. Jawahir

University of Kentucky

66H-index
308Paper Count
1.7WCitation Count
Published Papers 87
Publication Date
logo
Metrics-driven optimization for circular product design
errCIRP Annals
IF0
err2026-05-07
err0
PREAI
errFazleena Badurdeen; Junwon Ko; I.S. Jawahir
errShare
errSave
A Microstructure-based dynamic recrystallization model for dry machining of AISI 4140 with in-situ kinematic and thermal calibration and validation
errCIRP Annals
IF0
err2026-04-30
err0
PREAI
errJulius Schoop; German Gonzalez; Avery Hartley; Volker Schulze; I.S. Jawahir
errShare
errSave
Solid-state Additive Friction Stir Deposition (AFSD) of dissimilar AlCu materials with FSP-enabled interface design for improved metallurgical bonding
errJournal of Manufacturing Processes
IF6.8
err2026-03-24
err0
PREAI
errShivangi Paliwal; James Caudill; R. Sarvesha; I.S. Jawahir
errShare
errSave
Effect of Tool Face Geometry on Additive Friction Stir Deposition of Al-Mg-Si Alloy: Process Modeling and Validation in Correlation with Mechanical Properties
errJournal of Materials Processing Technology
IF7.5
err2025-08-08
err0
PREAI
errNimesh Fernando; R. Sarvesha; James Caudill; I.S. Jawahir
errShare
errSave
Revisiting machinability assessment: Towards total machining performance
errCIRP Annals
IF0
err2025-06-03
err0
PREAI
errI.S. Jawahir; Helmi Attia; Martin Dix; Hassan Ghadbeigi; Zhirong Liao; Julius Schoop; Alborz Shokrani
errShare
errSave
Real-time in-situ defect detection via multi-modal classification of waveforms for wire arc additive manufacturing
errJOURNAL OF INTELLIGENT MANUFACTURING
IF7.4
err2025-01-14
err0
PREAI
errClark, Benton; Ibn Mohsin, Syed; Poonawala, Hasan A.; Badurdeen, Fazleena; Brennan, Raymond; Jawahir, I. S.
errShare
errSave
A critical analysis of circular product attributes and limitations of product circularity assessment methods
errRESOURCES CONSERVATION & RECYCLING ADVANCES
IF6.4
err2024-11-01
err2
errOAAI
errKo, Junwon; Guedes, Gisele Bortolaz; Badurdeen, Fazleena; Jawahir, I. S.; Morris, K. C.; Ferrero, Vincenzo; Hapuwatte, Buddhika; Bradley, Ryan; Raihanian, Ardeshir
errShare
errSave
Finite Element Simulation of Ti-6Al-4V Alloy Machining with a Grain-Size-Dependent Constitutive Model Considering the Ploughing Effect Under MQL and Cryogenic Conditions
errJOURNAL OF MANUFACTURING AND MATERIALS PROCESSING
IF3.3
err2024-10-28
err0
errOAAI
errChen, Guang; Wu, Zhuoyang; Caudill, James; Jawahir, I. S.
errShare
errSave
An Investigation of the Effects of Cutting Edge Geometry and Cooling/Lubrication on Surface Integrity in Machining of Ti-6Al-4V Alloy
errJOURNAL OF MANUFACTURING AND MATERIALS PROCESSING
IF3.3
err2024-10-28
err0
errOAAI
errCaudill, J.; Sarvesha, R.; Chen, G.; Jawahir, I. S.
errShare
errSave
Mixed-Up Experience Replay for Adaptive Online Condition Monitoring
errIEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
IF7.2
err2024-02-01
err3
PREAI
errRussell, Matthew; Wang, Peng; Liu, Shaopeng; Jawahir, I. S.
errShare
errSave
Sustainable machining: Recent technological advances
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2024-01-01
err5
errOAAI
errShokrani, A.; Arrazola, P. J.; Biermann, D.; Mativenga, P.; Jawahir, I. S.
errShare
errSave
Surface conditioning in cutting and abrasive processes
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2024-01-01
err0
errOAAI
errSchulze, Volker; Aurich, Jan; Jawahir, I. S.; Karpuschewski, Bernhard; Yan, Jiwang
errShare
errSave
Surface integrity and superelastic response of additively manufactured Nitinol after heat treatment and finish machining
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2023-01-01
err5
errOAAI
errBertolini, R.; Bruschi, S.; Ghiotti, A.; Savio, E.; Ceseracciu, L.; Jawahir, I. S.
errShare
errSave
Numerical modeling of Ti-6Al-4V alloy orthogonal cutting considering microstructure dependent work hardening and energy density-based failure behaviors
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2022-10-01
err23
PREAI
errChen, Guang; Caudill, James; Ren, Chengzu; Jawahir, I. S.
errShare
errSave
Analysis of surface integrity in drilling carbon fiber reinforced polymer composite material under various cooling/lubricating conditions
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2022-10-01
err18
PREAI
errNagaraj, Arjun; Uysal, Alper; Gururaja, Suhasini; Jawahir, I. S.
errShare
errSave
Metrics-based dynamic product sustainability performance evaluation for advancing the circular economy
errJOURNAL OF MANUFACTURING SYSTEMS
IF14.2
err2022-07-01
err7
PREAI
errHapuwatte, Buddhika M.; Seevers, K. Daniel; Jawahir, I. S.
errShare
errSave
A critical review on additive manufacturing of Ti-6Al-4V alloy: microstructure and mechanical
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2022-05-01
err250
errOAAI
errNguyen, Hung Dang; Pramanik, A.; Basak, A. K.; Dong, Y.; Prakash, C.; Debnath, S.; Shankar, S.; Jawahir, I. S.; Dixit, Saurav; Buddhi, Dharam
errShare
errSave
Optimizing sustainability performance through component commonality for multi-generational products
errRESOURCES CONSERVATION AND RECYCLING
IF10.9
err2022-05-01
err11
PREAI
errHapuwatte, Buddhika M.; Badurdeen, Fazleena; Bagh, Adib; Jawahir, I. S.
errShare
errSave
Machining-induced surface integrity in titanium alloy Ti-6Al-4V: An investigation of cutting edge radius and cooling/lubricating strategies
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2022-02-01
err32
PREAI
errChen, Guang; Caudill, James; Chen, Shi; Jawahir, I. S.
errShare
errSave
Improved performance and surface integrity in finish machining of Inconel 718 with electrically charged tungsten disulphide MQL
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2022-01-01
err9
errOAAI
errShokrani, Alborz; Betts, Joseph; Jawahir, I. S.
errShare
errSave

Research Directions

No research directions
Co-authors
Cooperation Journals
宋
宋光铃 (Guang‐Ling Song)
H-index: 97 · Papers: 577
陈
陈时 (Shi Chen)
H-index: 93 · Papers: 678
F
Fritz Klocke
H-index: 66 · Papers: 1.3K
J
Joost R. Duflou
H-index: 58 · Papers: 598
S
Stephen T. Newman
H-index: 57 · Papers: 364
View more