logo
CanyamAI summaries for academic research
language
MobileMobile
  • Phone FeatureWeChat Mini Program
EnglishEnglish
noticeNotice
BlogBlog
delete
arrow
Back
V

Victor Songméné

Ecole de technologie superieure

30H-index
293Paper Count
3.2KCitation Count
Published Papers 45
Publication Date
logo
A systematic finite element-based methodology for predicting cutting forces in micro-milling of Al2024-T3 incorporating tool runout and chip flow direction
errSimulation Modelling Practice and Theory
IF4.6
err2026-04-16
err0
PREAI
errMehmet Aydın; Irfan Ullah; Victor Songmene
errShare
errSave
Investigation of Air Quality and Particle Emission During Wet Granite Edge Finishing on Machine Tool with Half-Beveled and Ogee Profile Tools
errJournal of Manufacturing and Materials Processing 2025, Vol. 9, Page 397
IF3.3
err2025-12-01
err0
errOAAI
errWael Mateur; Victor Songmene; Ali Bahloul; Mohamed Nejib Saidi; Jules Kouam
errShare
errSave
Effect of Melt Treatment and Heat Treatment on the Performance of Aluminum Cylinder Heads
errMATERIALS
IF3.2
err2025-02-26
err0
errOAAI
errDoty, Herbert W.; Samuel, Ehab; Samuel, Agnes M.; Songmene, Victor; Samuel, Fawzy H.
errShare
errSave
Effect of Fe Concentration and Superheating on the Microstructure and Tensile Properties of High Mg 413.0-Type Alloys: Role of Sr, Be, P, and La
errMATERIALS
IF3.2
err2025-01-08
err0
errOAAI
errDoty, Herbert W.; Samuel, Ehab; Samuel, Agnes M.; Elsharkawi, Ehab; Songmene, Victor; Samuel, Fawzy H.
errShare
errSave
Analysis of Ni-Cu Interaction in Aluminum-Based Alloys: Hardness, Tensile and Precipitation Behavior
errMATERIALS
IF3.2
err2024-09-23
err0
errOAAI
errSamuel, Ehab; Samuel, Agnes M.; Songmene, Victor; Doty, Herbert W.; Samuel, Fawzy H.
errShare
errSave
Role of Li and Sc Additions and Machining Conditions on Cutting Forces on Milling Behavior of A7075-Based Alloys
errJOURNAL OF MANUFACTURING AND MATERIALS PROCESSING
IF3.3
err2024-04-19
err0
errOAAI
errTahmasbi, Ali; Moungomo, Jean Brice Mandatsy; Samuel, Agnes M.; Zedan, Yasser; Songmene, Victor; Samuel, Fawzy H.
errShare
errSave
Experimental Investigation on the Effects of Tool Geometry and Cutting Conditions on Machining Behavior during Edge Finishing of Granite Using Concave and Chamfered Profiling Tools
errMICROMACHINES
IF3
err2024-02-24
err0
errOAAI
errMateur, Wael; Songmene, Victor; Kouam, Jules
errShare
errSave
Effect of Aging Treatment on the Strength and Microstructure of 7075-Based Alloys Containing 2% Li and/or 0.12% Sc
errMATERIALS
IF3.2
err2023-11-27
err2
errOAAI
errTahmasbi, Ali; Samuel, Agnes M.; Zedan, Yasser; Songmene, Victor; Samuel, Fawzy H.
errShare
errSave
Investigating the Effect of Heat Treatment on the Microstructure and Hardness of Aluminum-Lithium Alloys
errMATERIALS
IF3.2
err2023-09-30
err5
errOAAI
errRadan, Lida; Songmene, Victor; Zedan, Yasser; Samuel, Fawzy H.
errShare
errSave
A Review on the Analysis of Thermal and Thermodynamic Aspects of Grain Refinement of Aluminum-Silicon-Based Alloys
errMATERIALS
IF3.2
err2023-08-15
err14
errOAAI
errSamuel, Ehab; Samuel, Agnes M.; Songmene, Victor; Samuel, Fawzy H.
errShare
errSave
Experimental and numerical analyses of residual stress redistributions in large steel dies: Influence of tempering cycles and rough milling
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2023-05-01
err5
errOAAI
errSadeghifar, Morteza; Javidikia, Mahshad; Loucif, Abdelhalim; Jahazi, Mohammad; Songmene, Victor
errShare
errSave
A Comparative Study of Grain Refining of Al-(7-17%) Si Cast Alloys Using Al-10% Ti and Al-4% B Master Alloys
errMATERIALS
IF3.2
err2023-04-04
err7
errOAAI
errSamuel, Agnes M.; Samuel, Ehab; Songmene, Victor; Samuel, Fawzy H.
errShare
errSave
A Review on Porosity Formation in Aluminum-Based Alloys
errMATERIALS
IF3.2
err2023-03-01
err18
errOAAI
errSamuel, Agnes M. M.; Samuel, Ehab; Songmene, Victor; Samuel, Fawzy H. H.
errShare
errSave
Effect of Cu Content on the Alloy Tensile Properties of Al-Cu Based Alloys Tested at 25 °C and 250 °C: Application of the Concept of Quality Index
errMATERIALS
IF3.2
err2023-02-07
err2
errOAAI
errGirgis, Abram; Samuel, Ehab; Samuel, Agnes M.; Songmene, Victor; Samuel, Fawzy H.
errShare
errSave
Experimental Investigation on Part Quality and Dust Emission during Minimum Quantity Lubricated (MQL) Edge Finishing of Granite
errMICROMACHINES
IF3
err2022-10-11
err1
errOAAI
errBahri, Haithem; Songmene, Victor; Kouam, Jules
errShare
errSave
Effect of Bi and Ca on the Solidification Parameters of Sr-Modified Al-S-Cu (Mg) Alloys
errMATERIALS
IF3.2
err2022-10-05
err0
errOAAI
errEl-Hadad, Shimaa; Samuel, Agnes M.; Samuel, Fawzy H.; Doty, Herbert W.; Songmene, Victor
errShare
errSave
Effect of Zr and Ti Addition and Aging Treatment on the Microstructure and Tensile Properties of Al-2%Cu-Based Alloys
errMATERIALS
IF3.2
err2022-06-27
err3
errOAAI
errSamuel, Ehab; Nabawy, Ahmed M.; Samuel, Agnes M.; Doty, Herbert W.; Songmene, Victor; Samuel, Fawzy H.
errShare
errSave
Characterization of Si and SiO2 in Dust Emitted during Granite Polishing as a Function of Cutting Conditions
errMATERIALS
IF3.2
err2022-06-02
err4
errOAAI
errKouam, Jules; Songmene, Victor; Bahloul, Ali; Samuel, Agnes M.
errShare
errSave
A Numerical Model for Predicting the Effect of Tool Nose Radius on Machining Process Performance during Orthogonal Cutting of AISI 1045 Steel
errMATERIALS
IF3.2
err2022-05-08
err10
errOAAI
errTagiuri, Zakaria Ahmed M.; Dao, Thien-My; Samuel, Agnes Marie; Songmene, Victor
errShare
errSave
Assessment of the Influence of Additives on the Mechanical Properties and Machinability of Al-11%Si Cast Alloys: Application of DOE and ANOVA Methods
errMATERIALS
IF3.2
err2022-05-04
err0
errOAAI
errZedan, Yasser; Songmene, Victor; Samuel, Agnes M.; Samuel, Fawzy H.; Doty, Herbert W.
errShare
errSave

Research Directions

No research directions
Co-authors
Cooperation Journals
A
Amar K. Mohanty
H-index: 105 · Papers: 611
M
Manjusri Misra
H-index: 100 · Papers: 595
F
F. H. Samuel
H-index: 54 · Papers: 372
M
Mohammad Jahazi
H-index: 53 · Papers: 460
A
A. M. Samuel
H-index: 45 · Papers: 249
View more