logo
CanyamAI summaries for academic research
language
MobileMobile
  • Phone FeatureWeChat Mini Program
EnglishEnglish
noticeNotice
BlogBlog
delete
arrow
Back
A

Antonio Cutolo

Polytechnic University of Milan

16H-index
37Paper Count
879Citation Count
Published Papers 21
Publication Date
logo
Torsional and axial tension/compression fatigue behavior of Ti-6Al-4V diamond lattices produced by Laser Powder Bed Fusion (LPBF)
errInternational Journal of Fatigue
IF6.8
err2025-10-06
err0
errOAAI
errSameer D. Meshram; Elina Vanderhenst; Antonio Cutolo; Brecht Van Hooreweder
errShare
errSave
Influence of layer thickness and post-processes on the quasi-static and fatigue behaviour of Ti-6Al-4V specimens with embedded structural health monitoring system produced by laser powder bed fusion
errStructural Health Monitoring
IF0
err2025-09-11
err0
PREAI
errMichaël Hinderdael; Antonio Cutolo; Nima Razavi; Filippo Berto; Brecht Van Hooreweder
errShare
errSave
Direct Current Potential Drop Method for the Identification of Fatigue Damage in Triply Periodic Minimal Surfaces Structures for Heat Exchangers
errFATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
IF3.2
err2025-09-01
err0
errOAAI
errBrambati, Giovanni; Cutolo, Antonio; Bongiorni, Lorenzo; Romano, Simone; Foletti, Stefano
errShare
errSave
Finetuning design and process conditions to minimise manufacturing deviations in strut-based metal lattice structures produced by Laser Powder Bed Fusion
errAPPLIED MATERIALS TODAY
IF6.9
err2025-02-01
err0
PREAI
errBeevers, Emilie; Cutolo, Antonio; Van Hooreweder, Brecht
errShare
errSave
Enhanced fatigue life of additively manufactured high-strength TiB2-reinforced Al-Cu-Mg-Ag composite through in-process surface modification during hybrid laser processing
errVIRTUAL AND PHYSICAL PROTOTYPING
IF8.8
err2023-11-17
err3
errOAAI
errSenol, Seren; Cutolo, Antonio; Datye, Amit; Hooreweder, Brecht Van; Vanmeensel, Kim
errShare
errSave
A design strategy to enhance the mechanical response of diamond-based lattice structures produced by laser powder bed fusion
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2023-06-01
err6
PREAI
errCutolo, A.; Beevers, E.; Van Hooreweder, B.
errShare
errSave
Unravelling the relation between Laser Powder Bed Fusion processing parameters and the mechanical behaviour of as built lattices in a novel Al-Cu-Mg-Ag-Ti-B alloy
errJOURNAL OF MATERIALS PROCESSING TECHNOLOGY
IF7.5
err2023-06-01
err6
PREAI
errBeevers, Emilie; Cutolo, Antonio; Mertens, Francis; Van Hooreweder, Brecht
errShare
errSave
Fatigue life prediction of a L-PBF component in Ti-6Al-4V using sample data, FE-based simulations and machine learning
errINTERNATIONAL JOURNAL OF FATIGUE
IF6.8
err2023-02-01
err18
errOAAI
errCutolo, Antonio; Lammens, Nicolas; Boer, Koen Vanden; Erdelyi, Hunor; Schulz, Matthias; Muralidharan, Gokula Krishna; Thijs, Lore; Elangeswaran, Chola; Van Hooreweder, Brecht
errShare
errSave
Fatigue behaviour of diamond based Ti-6Al-4V lattice structures produced by laser powder bed fusion: On the effect of load direction
errMATERIALS TODAY COMMUNICATIONS
IF4.5
err2022-12-01
err12
PREAI
errCutolo, Antonio; Van Hooreweder, Brecht
errShare
errSave
Improving fatigue performance of metal parts with up-facing inclined surfaces produced by laser powder bed fusion and in-situ laser remelting
errADDITIVE MANUFACTURING LETTERS
IF4.7
err2022-12-01
err8
errOAAI
errOrdnung, Daniel; Metelkova, Jitka; Cutolo, Antonio; Van Hooreweder, Brecht
errShare
errSave
A new strategy for metal additive manufacturing using an economical water-atomized iron powder for laser powder bed fusion
errJOURNAL OF MATERIALS PROCESSING TECHNOLOGY
IF7.5
err2022-10-01
err5
PREAI
errIm, Taehyeob; Gurung, Kopila; Meyers, Sebastian; Cutolo, Antonio; Oh, Huengseok; Lee, Jai-Sung; Van Hooreweder, Brecht; Lee, Caroline Sunyong
errShare
errSave
On the role of building orientation and surface post-processes on the fatigue life of Ti-6Al-4V coupons manufactured by laser powder bed fusion
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2022-04-01
err16
errOAAI
errCutolo, Antonio; Elangeswaran, Chola; Muralidharan, Gokula Krishna; Van Hooreweder, Brecht
errShare
errSave
Predicting fatigue life of metal LPBF components by combining a large fatigue database for different sample conditions with novel simulation strategies
errADDITIVE MANUFACTURING
IF11.1
err2022-02-01
err23
PREAI
errElangeswaran, Chola; Cutolo, Antonio; Gallas, Simone; Dinh, Tien Dung; Lammens, Nicolas; Erdelyi, Hunor; Schulz, Matthias; Muralidharan, Gokula Krishna; Thijs, Lore; Craeghs, Tom; Bruycker, Evy De; Bore, Koen Vanden; Clijsters, Stijn; Peirs, Jan; Desmet, Win; Van Paepeghem, Win; Hooreweder, Brecht Van
errShare
errSave
Influence of relative density on quasi-static and fatigue failure of lattice structures in Ti6Al4V produced by laser powder bed fusion
errSCIENTIFIC REPORTS
IF3.9
err2021-09-29
err23
errOAAI
errAlana, Markel; Cutolo, Antonio; Ruiz de Galarreta, Sergio; Van Hooreweder, Brecht
errShare
errSave
Understanding elastic anisotropy in diamond based lattice structures produced by laser powder bed fusion: Effect of manufacturing deviations
errMATERIALS & DESIGN
IF7.9
err2020-10-01
err21
errOAAI
errAlana, Markel; Cutolo, Antonio; Probst, Gabriel; de Galarreta, Sergio Ruiz; Van Hooreweder, Brecht
errShare
errSave
Microstructural analysis and fatigue crack initiation modelling of additively manufactured 316L after different heat treatments
errMATERIALS & DESIGN
IF7.9
err2020-09-01
err46
errOAAI
errElangeswaran, Chola; Cutolo, Antonio; Muralidharan, Gokula Krishna; Vanmeensel, Kim; Van Hooreweder, Brecht
errShare
errSave
Post-treatment selection for tailored fatigue performance of 18Ni300 maraging steel manufactured by laser powder bed fusion
errFATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
IF3.2
err2020-07-21
err45
PREAI
errElangeswaran, Chola; Gurung, Kopila; Koch, Raphael; Cutolo, Antonio; Van Hooreweder, Brecht
errShare
errSave
Mechanical properties of diamond lattice Ti-6Al-4V structures produced by laser powder bed fusion: On the effect of the load direction
errJOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS
IF3.5
err2020-04-01
err70
errOAAI
errCutolo, Antonio; Engelen, Bert; Desmet, Wim; Van Hooreweder, Brecht
errShare
errSave
Effect of post-treatments on the fatigue behaviour of 316L stainless steel manufactured by laser powder bed fusion
errINTERNATIONAL JOURNAL OF FATIGUE
IF6.8
err2019-06-01
err148
errOAAI
errElangeswaran, Chola; Cutolo, Antonio; Muralidharan, Gokula Krishna; de Formanoir, Charlotte; Berto, Filippo; Vanmeensel, Kim; Van Hooreweder, Brecht
errShare
errSave
Influence of layer thickness and post-process treatments on the fatigue properties of CoCr scaffolds produced by laser powder bed fusion
errADDITIVE MANUFACTURING
IF11.1
err2018-10-01
err58
errOAAI
errCutolo, Antonio; Neirinck, Bram; Lietaert, Karel; de Formanoir, Charlotte; Van Hooreweder, Brecht
errShare
errSave

Research Directions

The data has not been retrieved yet.
Co-authors
Cooperation Journals
F
Filippo Berto
H-index: 79 · Papers: 1.0K
W
Wim Desmet
H-index: 58 · Papers: 1.4K
K
Kim Vanmeensel
H-index: 52 · Papers: 250
B
Brecht Van Hooreweder
H-index: 37 · Papers: 179
C
Caroline Sunyong Lee
H-index: 36 · Papers: 243
View more