logo
CanyamAI summaries for academic research
language
MobileMobile
  • Phone FeatureWeChat Mini Program
EnglishEnglish
noticeNotice
BlogBlog
delete
arrow
Back
R

Rajiv S. Mishra

University of North Texas

94H-index
862Paper Count
3.9WCitation Count
Published Papers 300
Publication Date
logo
In-situ fabrication of Ti6Al4V-matrix composite with modulated mechanical properties
errJournal of Materials Research and Technology
IF6.6
err2026-04-30
err0
errOAAI
errShambhavi Sakri; Ravi Sankar Haridas; Rajiv S. Mishra
errShare
errSave
Crack susceptibility of novel W-Nb-C alloy for laser beam powder bed fusion additive manufacturing
errActa Materialia
IF9.3
err2026-03-20
err0
PREAI
errAmit Kumar Singh; Priyanka Agrawal; Eric Kusterer; Fredrick N. Michael; Rajiv S. Mishra
errShare
errSave
Innovative SolidStir extrusion for energy-efficient metal recycling
errMaterials & Design
IF7.9
err2026-03-10
err0
errOAAI
errAnurag Gumaste; Ravi Sankar Haridas; Supreeth Gaddam; Kumar Kandasamy; Brandon A. McWilliams; Kyu C. Cho; Rajiv S. Mishra
errShare
errSave
Development of a W-Cr-C tungsten alloy for synergistic printability and performance through laser powder bed fusion additive manufacturing
errInternational Journal of Refractory Metals and Hard Materials
IF4.6
err2025-12-09
err0
PREAI
errPrithvi Dev Awasthi; Priyanka Agrawal; Amit Kumar Singh; Aishani Sharma; Fredrick N. Michael; Rajiv S. Mishra
errShare
errSave
Microstructural gradients in an Al-Mg-Ti-Zr alloy via tool offset-controlled SolidStir® extrusion
errMaterials Letters
IF2.7
err2025-10-14
err0
PREAI
errAishani Sharma; Shikhar Krishn Jha; Anurag Gumaste; Roopam Jain; Rajiv S. Mishra
errShare
errSave
Experimental determination of critical resolved shear stress for strain-induced phase transformation
errScripta Materialia
IF5.6
err2025-08-30
err0
PREAI
errRoopam Jain; Shikhar Krishn Jha; Ravi Sankar Haridas; Priyanka Agrawal; Jun-Sang Park; Rajiv S. Mishra
errShare
errSave
Understanding the deformation behavior of the γ rich transformative Fe38.5Mn20Co20Cr15Si5Cu1.5 complex concentrated alloy using in situ synchrotron diffraction
errmaterials science materials in engineering
IF0
err2025-08-25
err0
PREAI
errRoopam Jain; Ravi Sankar Haridas; Priyanka Agrawal; Aishani Sharma; Jun-Sang Park; Rajiv S. Mishra
errShare
errSave
Novel high specific-strength multi-topology Al-Ni-Ti-Zr-Mn alloy using laser powder bed fusion additive manufacturing
errAdditive Manufacturing Letters
IF4.7
err2025-07-22
err0
errOAAI
errAmit Kumar Singh; Prithvi D. Awasthi; Ankita Roy; Priyanka Agrawal; Aishani Sharma; Anurag Gumaste; Ravi Sankar Haridas; Rajiv S. Mishra
errShare
errSave
Impact of metastability engineered low energy interfaces on synergistic enhancement of strength and strain hardening through deformation-driven bidirectional transformation
errActa Materialia
IF9.3
err2025-07-17
err0
PREAI
errShreya Mukherjee; Ravi Sankar Haridas; Priyanka Agrawal; Aishani Sharma; Prithvi D. Awasthi; Rajiv S. Mishra
errShare
errSave
Columnar-to-equiaxed transition in laser fusion additive manufacturing
errSCRIPTA MATERIALIA
IF5.6
err2025-04-01
err0
PREAI
errRoy, Ankita; Sin, Amit Kumar; Arora, Amit; Mcwilliams, B. A.; Mock, Clara; Cho, K. C.; Mishra, Rajiv S.
errShare
errSave
Decoding deformation-induced phase transformation in a high entropy alloy via nanoindentation pop-in phenomenon
errMATERIALS RESEARCH LETTERS
IF7.9
err2025-03-13
err0
errOAAI
errDhal, Abhijeet; Mukherjee, Shreya; Jain, Roopam; Haridas, Ravi Sankar; Mishra, Rajiv S.
errShare
errSave
Comparative analysis of thermally evaporated nanoscale CdS thin film's structural, morphological, optical and nanomechanical properties
errJOURNAL OF MOLECULAR STRUCTURE
IF4.7
err2025-03-01
err1
PREAI
errGaur, Shailendra Kumar; Chaudhary, Ashwani; Murtaza, Qasim; Mishra, R. S.
errShare
errSave
SS316/CCA laminated metal composite fabricated by additive friction stir deposition: Microstructure and mechanical properties
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2025-03-01
err0
errOAAI
errHaridas, Ravi Sankar; Gumaste, Anurag; Kusterer, Eric; Davis, Devin; Gaddam, Supreeth; Mcwilliams, Brandon; Cho, Kyu C.; Mishra, Rajiv S.
errShare
errSave
Process-specific design strategy enables exceptional as-deposited strength-ductility synergy in novel Al-Ce alloys via additive friction stir deposition (AFSD)
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2025-03-01
err0
errOAAI
errSoni, Vishal; Menchaca, Roberto Liam; Davis, Devin; Kumar, N. Naveen; Gonzalez, Maria; Awasthi, Prithvi; Haridas, Ravi Sankar; Loukus, Adam; Weiss, David; Mishra, Rajiv S.; Vasudevan, Vijay K.
errShare
errSave
Phase separation induced heterostructure promotes strength-ductility synergy in Cu-rich compositionally complex alloy in as-cast state
errMATERIALS TODAY COMMUNICATIONS
IF4.5
err2025-03-01
err0
PREAI
errMishra, D.; Dhal, A.; Li, X.; Guo, S.; Narayan, R. L.; Mishra, R. S.; Singh, J.; Nene, S. S.
errShare
errSave
Friction stir based welding, processing, extrusion and additive manufacturing
errPROGRESS IN MATERIALS SCIENCE
IF40
err2024-12-01
err7
PREAI
errLiu, F. C.; Feng, A. H.; Pei, X.; Hovanski, Y.; Mishra, R. S.; Ma, Z. Y.
errShare
errSave
Modeling the effects of initial grain size, martensitic transformation induced dynamic grain refinement, phases, and texture on strength of a high entropy alloy using crystal plasticity
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2024-11-01
err0
errOAAI
errFeng, Zhangxi; McWilliams, Brandon A.; Mishra, Rajiv S.; Knezevic, Marko
errShare
errSave
Near crack free additive manufacturing of a novel W-Nb-C alloy
errMATERIALS RESEARCH LETTERS
IF7.9
err2024-10-30
err0
errOAAI
errAwasthi, Prithvi D.; Dhal, Abhijeet; Michael, Fredrick N.; Mishra, Rajiv S.
errShare
errSave
Enhanced thermal stability in additive friction stir deposited ODS IN9052 Al alloy
errACTA MATERIALIA
IF9.3
err2024-10-01
err0
PREAI
errSharma, Aishani; Jain, Roopam; Agrawal, Priyanka; Mukherjee, Shreya; Gumaste, Anurag; Davis, Devin F.; Haridas, Ravi Sankar; Mishra, Rajiv S.
errShare
errSave
Tuning the mechanical properties of Ti6Al4V alloy produced by direct-write additive manufacturing
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2024-10-01
err0
PREAI
errSakri, Shambhavi; Haridas, Ravi Sankar; Mishra, Rajiv S.; Shepherd, Nigel D.
errShare
errSave

Research Directions

No research directions
Co-authors
Cooperation Journals
D
Dierk Raabe
H-index: 178 · Papers: 2.3K
Y
Yuntian Zhu
H-index: 124 · Papers: 743
P
Peter K. Liaw
H-index: 121 · Papers: 1.5K
Р
Р. З. Валиев
H-index: 118 · Papers: 1.1K
R
Rajarshi Banerjee
H-index: 83 · Papers: 449
View more