Arcelormittal

学者数514

论文数451

被引数2

关联论文 (451)

发表时间

Investigation on oily bubble flotation for enhanced carbon recovery from coal gasification coarse slag: Experiments and molecular dynamics simulations with the inclusion of oil film thickness effects

FUEL

IF7.5

2026-01-21

PREAI

Wang, Shiwei; Kadagala, Mohana Rao; Wang, Chengyong

Study of hydrogen embrittlement in the green steelworks - the case of the high temperature nickel-based alloys

MATERIAUX & TECHNIQUES

IF1.1

2025-10-29

PREAI

Shickle, Katharina; Kaindl, Reinhard; Graz, Yann; Petrovic, Vojislav

Biocarbon Suitability Evaluation for Direct Injection in Blast Furnace Ironmaking 高炉炼铁中直接注入的生物碳适用性评估

STEEL RESEARCH INTERNATIONAL

IF2.5

2025-10-01

OAAI

Huang, Xianai; Ng, Ka Wing; Todoschuk, Ted; Scott, Graeme

Investigation of kerosene mixed with non-ionic surfactants as potential flotation collectors for enhanced carbon recovery from coal gasification fine slag: Experimental and molecular dynamic simulations 研究煤油与非离子表面活性剂混合物作为提高煤气化细灰中碳回收率的潜在浮选捕收剂：实验与分子动力学模拟

Journal of Environmental Chemical Engineering

IF7.2

2025-09-22

PREAI

Jinjie Tang; Shiwei Wang; Mohana Rao Kadagala; Chengyong Wang

Impact of hot and warm deformation on the bainite morphology and kinetics during continuous cooling of low- and medium-C carbide-free bainitic steels 低碳无碳化物贝氏体钢连续冷却过程中热变形和温变形对贝氏体形貌和动力学的影响

Materials & Design

IF7.9

2025-07-18

PREAI

Pedro José de Castro; Antonio Carlos de Figueiredo Silveira; Alexandre da Silva Rocha; Andreas Stark; Thomas Sourmail; Jérémy Epp

A plasticity-induced internal length mean field model based on statistical analyses of EBSD and nanoindentation data 基于EBSD和纳米压痕数据统计分析的塑性诱导内禀长度平均场模型

INTERNATIONAL JOURNAL OF PLASTICITY

IF12.8

2025-06-01

OAAI

Chamma, Layal; Pipard, Jean-Marc; Arlazarov, Artem; Richeton, Thiebaud; Berbenni, Stephane

Compressive behaviour of stub composite columns with stainless steel square outer tubes and recycled aggregate concrete

STRUCTURES

IF4.3

2025-05-01

OAAI

Dai, Xianghe; Zhou, Kan; Yang, Jie

Effect of Si concentration on the liquid metal embrittlement susceptibility of advanced high strength steels

MATERIALIA

IF2.9

2025-05-01

OAAI

Abdiyan, Fateme; McDermid, Joseph R.; Macwan, Andrew; Pourbahari, Bita; de Miera, Mirnaly Saenz; Langelier, Brian; Zurob, Hatem S.

Effect of Mo Addition on the Susceptibility of Advanced High Strength Steels to Liquid Metal Embrittlement

MATERIALS

IF3.2

2025-03-14

OAAI

Abdiyan, Fateme; Mcdermid, Joseph R.; Okigami, Fernando; Pourbahari, Bita; Macwan, Andrew; de Miera, Mirnaly Saenz; Langelier, Brian; Arcuri, Gabriel A.; Zurob, Hatem S.

Alternating ductile and brittle cracking mode in medium manganese steel sheets

SCRIPTA MATERIALIA

IF5.6

2025-03-01

PREAI

Heremans, Thibaut; Perlade, Astrid; Jacques, Pascal J.; Pardoen, Thomas

Cr-free refractories for copper metallurgy: Raw materials and FactSage thermodynamic simulations

CERAMICS INTERNATIONAL

IF5.6

2025-01-01

PREAI

Ebska, Ilona Jastrz; Ludwig, Maciej; Przystas, Joanna

Numerical, Physical, and Industrial Investigations on Hot Metal Desulphurization-From Macromixing Conditions to Reaction Rate Phenomena

MATERIALS

IF3.2

2024-11-29

OAAI

Cwudzinski, Adam; Falkus, Jan; Podolska-Loska, Angelika

Digitalisation of Railway Tunnels for Climate Change Adaptation and Enhanced Asset Circularity

SUSTAINABILITY

IF3.3

2024-11-07

OAAI

Kaewunruen, Sakdirat; Lin, Yi-Hsuan; Rosli, Harris; Fan, Chen-Wei; Pesta, Jan; Fohl, Francois

An industrially-validated tube model for steam methane reformers used in direct reduced iron production

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

IF8.3

2024-11-01

PREAI

Jeong, Jihun; Herrera, Michelle; Parvathaneni, Sirisha; Chen, Elaine; Andrade, Marcelo; Harris, Christopher; Baldea, Michael

Iron-Ore Reduction in Fluidized Beds: Review of Commercial Technologies, Status, and Challenges

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

IF3.9

2024-10-24

PREAI

Parvathaneni, Sirisha; Kodukula, Bhaskar; Andrade, Marcelo W.

High cycle fatigue life estimation of punched and trimmed specimens considering residual stresses and surface roughness

INTERNATIONAL JOURNAL OF FATIGUE

IF6.8

2024-09-01

OAAI

Gustafsson, David; Parareda, Sergi; Munier, Remi; Olsson, Erik

Assessment of flotation process efficiency in producing DR concentrate from a low-grade iron ore 从低品位铁矿石生产DR精矿的浮选工艺效率评估

MINERALS ENGINEERING

IF5

2024-09-01

PREAI

Mesquita, J.; Badawi, M.; Belissont, R.; Turrer, H.; Foucaud, Y.

Silicon effect on retardation of Fe-Zn alloying behavior: Towards an explanation of liquid zinc embrittlement susceptibility of third generation advanced high strength steels

CORROSION SCIENCE

IF8.5

2024-07-01

PREAI

Bhattacharya, D.; Cho, L.; Colburn, J.; van der Aa, E.; Pichler, A.; Ghassemi-Armaki, H.; Findley, K. O.; Speer, J. G.; Pottore, N.

The effect of κ-carbides on high cycle fatigue behavior of a Fe-Mn-Al-C lightweight steel

INTERNATIONAL JOURNAL OF FATIGUE

IF6.8

2024-07-01

OAAI

Gomez, A.; Banis, A.; Avella, M.; Molina-Aldareguia, J. M.; Petrov, R. H.; Dutta, A.; Sabirov, I.

CFD Modeling of the Industrial-Scale Bottom-Fired Direct Reduced Iron Reforming Process

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

IF3.9

2024-06-26

PREAI

Parvathaneni, Sirisha; Andrade, Marcelo W.