logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
I

Indian Institute of Information Technology Design & Manufacturing, Jabalpur

学者数714
论文数691
被引数0
关联论文 (691)
发表时间
delete
Magneto-rheological finishing technique (MRFT) for enhanced surface finish in components fabricated through hybrid deformation machining (HDM) and conventional processes磁流变抛光技术（MRFT）在通过混合变形加工（HDM）和传统工艺制造组件中提升表面光洁度
errPROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
IF1.9
err2026-05-01
err1
PREAI
errMandaloi, Gangaram; Shahare, Harshal Y.; Kumar, Yogendra; Tandon, Puneet
err分享
err收藏
Graphene-Integrated Perforation-Filled Octagon Dielectric Resonator Metasurface for Multifunctional Terahertz Applications石墨烯集成穿孔填充八边形介质谐振器超表面用于多功能太赫兹应用
errIEEE Transactions on Plasma Science
IF1.5
err2026-05-01
err0
PREAI
errChandachoriya, Ankit; Bhadoriya, Ranjeet Pratap Singh; Kumar, Anil; Panwar, Ravi
err分享
err收藏
Experimentally validated hybrid analytical-numerical approach to determine frequency characteristics of complex step cantilever shapes for sensor applications实验验证的混合解析-数值方法，用于确定传感器应用中复杂阶梯悬臂结构的频率特性
errMICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS
IF1.8
err2026-04-11
err0
PREAI
errMishra, Shubham Kumar; Ansari, Mohd. Zahid; Husain, Afzal
err分享
err收藏
Solving an infinite system of mixed Volterra-Fredholm integral equations in ℓp space using a numerical method利用数值方法求解ℓp空间中的无限混合Volterra-Fredholm积分方程组
errCOMPUTATIONAL & APPLIED MATHEMATICS
IF2.5
err2026-04-02
err0
PREAI
errDevi, Ruprekha; Halder, Sukanta; Hazarika, Bipan
err分享
err收藏
Numerical Investigation of Rb1-x Cs x SnCl3 Perovskite Solar Cells: Role of Transport Layers and Defect PassivationRb1-xCsxSnCl3钙钛矿太阳能电池的数值研究：传输层和缺陷钝化的作用
errACS Applied Engineering Materials
IF3.5
err2026-04-01
err0
PREAI
errSooraj, S.; Nath, R. Adithya; Narayanan, Arya; Jayakrishnan, R.
err分享
err收藏
Extrusion-based additive manufacturing of piezoelectric ceramics: challenges and opportunities基于挤压的压电陶瓷增材制造：挑战与机遇
errJournal of Electroceramics
IF2.6
err2026-04-01
err0
PREAI
errTelang, Vicky Subhash; Patil, Ishant G.; Shahare, Harshal Y.; Calliari, Irene; Dabala, Manuele; Nanda, Himansu Sekhar; Tandon, Puneet
err分享
err收藏
Investigation of an Ultrawideband Circularly Polarized Highly Efficient Graphene Plasmonic THz Antenna for Ultrafast 6G Communications研究用于超高速6G通信的超宽带圆极化高效石墨烯等离激元太赫兹天线
errInternational Journal of Communication Systems
IF1.8
err2026-03-25
err0
PREAI
errSharma, Amit; Dinesh Kumar, V.
err分享
err收藏
Condition monitoring and fault diagnosis of helical geared systems under progressive seeded faults using ICEEMDAN technique螺旋齿轮系统在渐进性植入故障下的状态监测与故障诊断方法研究——基于ICEEMDAN技术
errJournal of Vibration Engineering & Technologies
IF2.4
err2026-03-19
err0
PREAI
errGunasegaran, V.; Chelladurai, H.; Amarnath, M.; Praveen Krishna, I. R.
err分享
err收藏
Conformational analysis of different tautomers of some antibiotics一些抗生素不同互变异构体的构象分析
errJournal of Molecular Modeling
IF2.5
err2026-03-17
err0
PREAI
errDaheriya, R.; Jena, N. R.
err分享
err收藏
Influence of process parameters of metal additive manufacturing (MAM) and incremental forming (IF) in hybridising MAM and IF: a reviewTiwari, M.K.; Ponappa, K.; Tandon, P. 金属增材制造（MAM）和增量成形（IF）工艺参数对MAM与IF混合制造的影响：综述. 先进材料加工技术, 2026, 1–27. [Google Scholar] [CrossRef]
errAdvances in Materials and Processing Technologies
IF2.1
err2026-03-01
err1
PREAI
errTiwari, Mithilesh Kumar; Ponappa, K.; Tandon, Puneet
err分享
err收藏
Reconstruction of Compressed VCG Signal Using Cubic Spline Interpolation基于三次样条插值的压缩VCG信号重构
errJournal of Circuits Systems and Computers
IF1
err2026-02-01
err0
PREAI
errTiwari, Aditya; Vimal, Ronak; Kumar, A.
err分享
err收藏
Ergonomic evaluation and redesign of a makeshift vehicle repairing cart人机工程学评估和一种临时车辆维修车的再设计
errWORK-A Journal of Prevention Assessment & Rehabilitation
IF1.5
err2026-02-01
err0
PREAI
errMukhopadhyay, Prabir; Vinzuda, Vipul; Choudhary, Aman; Sharma, Ravi
err分享
err收藏
The Unique Solvability Conditions for the Generalized Absolute Value Equations广义绝对值方程的可解性条件
errNational Academy Science Letters-India
IF1.3
err2026-02-01
err0
PREAI
errKumar, Shubham; Deepmala; Wu, Shi-Liang
err分享
err收藏
Effect of coil current on temperature distribution on extruder in extrusion based metal additive manufacturing using induction heatingEinfluss des Spulenstroms auf die Temperaturverteilung am Extruder bei der extrusionsbasierten additiven Metallfertigung unter Verwendung von Induktionserwärmung感应加热下线圈电流对基于挤压的金属增材制造中挤出机温度分布的影响
errMaterialwissenschaft und Werkstofftechnik
IF1.1
err2026-02-01
err0
PREAI
errSihore, A.; Choubey, R. K.; Jain, P. K.; Srivastava, M.
err分享
err收藏
Classification of hand gesture based on optimal deep feature selection using sEMG signal基于最优深度特征选择的sEMG信号手部姿态分类
errSignal Image and Video Processing
IF2.1
err2026-01-27
err0
PREAI
errDixit, Akanksha; Bajaj, Varun; Padhy, Prabin Kumar
err分享
err收藏
Real-time layer-by-layer defects detection in 3D-printed multi-geometry polymer components using deep learning基于深度学习的3D打印多几何聚合物组件实时逐层缺陷检测
errMeasurement
IF5.6
err2026-01-01
err0
PREAI
errBhandarkar, Vivek V.; Karnati, Mohan; Tandon, Puneet
err分享
err收藏
Balancing Oxygen Reduction and Thermal Expansion in Low-Temperature Solid Oxide Fuel Cell Cathodes via Codoping in SrCoO3
errACS APPLIED ENERGY MATERIALS
IF5.5
err2026-01-01
err0
PREAI
errKumar, R. Vinoth; Ponvijayakanthan, L.; Jaiswal, Neeraj K.; Khandale, Anushree
err分享
err收藏
A trust region method for uncertain multiobjective optimization: comparative analysis with existing descent methods不确定多目标优化的信赖域方法：与现有下降方法的比较分析
errOptimization and Engineering
IF1.7
err2026-01-01
err2
PREAI
errKumar, Shubham; Mahato, Nihar Kumar; Ghosh, Debdas
err分享
err收藏
Analysis of Polarization Gradient Effect on MGG-Induced Reliability Variations in JLNC-FinFET H2 Gas Sensors极化梯度效应对MGG诱导的JLNC-FinFET H2气体传感器可靠性变化的分析
errIEEE Sensors Letters
IF2.2
err2026-01-01
err0
PREAI
errGandhi, Navneet; Kondekar, P. N.
err分享
err收藏
Electrostatic Analysis of AlN/GaN HEMTs Using β-Ga2O3 Buffer on SiC and β-Ga2O3 Wafers for 5G/6G Wireless Infrastructure and Future Sub-THz ApplicationsAlN/GaN HEMT的电静力分析：基于SiC和β-Ga2O3晶圆的β-Ga2O3缓冲层用于5G/6G无线基础设施及未来亚太赫兹应用
errJournal of Electronic Materials
IF2.5
err2026-01-01
err0
PREAI
errMounika, B.; Ajayan, J.; Dwivedi, Amit Krishna; Sharma, Pankaj; Sun, Shuxiang
err分享
err收藏