Politecn Torino

学者数736

论文数361

被引数120

关联论文 (179)

发表时间

Surface topography and cross-section analysis of K340 cold work tool steel double-tracks deposited by directed energy deposition technique K340冷作工具钢通过定向能量沉积技术沉积的双轨道的表面形貌和截面分析

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY

IF5.4

2025-07-01

OAAI

Kenevisi, Mohammad Saleh; Gobber, Federico Simone; Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio; Biamino, Sara; Ugues, Daniele

Defining the influence area of uplift and subsidence from underground gas storage in anticline structural traps: Insights from InSAR cross-correlation 定义背斜构造圈闭中地下储气库的抬升和沉降影响区域：来自InSAR互相关的见解

GONDWANA RESEARCH

IF8.6

2025-07-01

PREAI

Codegone, G.; Benetatos, C.; Uttini, A.; Rucci, A.; Fiaschi, S.; Mantegazzi, A.; Coti, C.

Assessing the interaction of an energy tunnel with the underground thermal conditions in an urban area 评估能量隧道与城市地区地下热条件的相互作用

GEOTHERMICS

IF3.9

2025-07-01

OAAI

Barla, M.; Insana, A.; Alvi, M. R.

Investigating the impact of atrial fibrillation on the vascular onset of glaucoma via multiscale cardiovascular modeling 通过多尺度心血管建模研究心房颤动对青光眼血管起始的影响

COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE

IF4.8

2025-07-01

PREAI

Scarsoglio, Stefania; Congiu, Luca; Ridolfi, Luca

Mathematical modelling of thermal interactions during freezing: Effects on product morphology and drying behaviour 冻结过程中热相互作用的数学建模：对产品形貌和干燥行为的影响

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES

IF4.7

2025-07-01

OAAI

Massotti, Vincenzo; Artusio, Fiora; Barresi, Antonello A.; Pisano, Roberto

Feasibility analysis of integrating solar thermal technologies into district heating network with urban building energy modeling 将太阳能热技术集成到区域供热网络中的可行性分析，结合城市建筑能耗建模

ENERGY AND BUILDINGS

IF7.1

2025-07-01

OAAI

Usta, Y.; Montazeri, A.; Mutani, G.

Gallium based hollow silica nanospheres for the acid-catalyzed upgrading of glycerol: Enhanced activity disclosed via an in-depth nuclear magnetic resonance approach 基于镓的空心二氧化硅纳米球用于酸催化甘油升级：通过深入的核磁共振方法揭示的增强活性

JOURNAL OF CATALYSIS

IF6.5

2025-07-01

PREAI

Soumoy, Loraine; Morena, Anthony; Armandi, Marco; Fiorilli, Sonia; Fusaro, Luca; Debecker, Damien P.; Aprile, Carmela

Stress assessment with EEG and machine learning in affective VR environments 在情感化VR环境中的EEG与机器学习应力评估

NEUROCOMPUTING

IF6.5

2025-07-01

PREAI

Marcolin, Federica; Olivetti, Elena Carlotta; Jimenez, Ivonne Angelica Castiblanco; Passavanti, Giorgia; Moos, Sandro; Vezzetti, Enrico; Celeghin, Alessia

A new computationally efficient model of the non-linear dynamics in harmonic drive reducers 谐波减速器中非线性动力学的一种新型计算高效模型

MECHANISM AND MACHINE THEORY

IF5.3

2025-07-01

PREAI

Guida, Roberto; Bertolino, Antonio Carlo; De Martin, Andrea; Sorli, Massimo

A new finite element axisymmetric model with non-axisymmetric thermal loads for thermal analyses of tread braked wheels 一种用于热分析的、带有非轴对称热载荷的新型有限元轴对称模型，适用于带制动轮胎的车轮

TRIBOLOGY INTERNATIONAL

IF6.9

2025-06-19

OAAI

Magelli, Matteo; Zampieri, Nicolo

Boundary layer transition induced by roughness arrays over NACA 0012 airfoil 粗糙度阵列诱导的NACA 0012翼型边界层转捩

EXPERIMENTAL THERMAL AND FLUID SCIENCE

IF3.3

2025-06-07

PREAI

Ye, Qingqing; Avallone, Ncesco; Ragni, Daniele; Casalino, Damiano

A new versatile algorithm to extract particle's features from FESEM images: method evaluation and a case study on rice kernels 一种从FESEM图像中提取粒子特征的新型通用算法：方法评估及在稻谷籽粒上的案例研究

CHEMOMETRICS AND INTELLIGENT LABORATORY SYSTEMS

IF3.8

2025-06-04

OAAI

Sozzi, Mattia; Cavallini, Nicola; Chiado, Alessandro; Gavoci, Gentian; Cantaluppi, Enrico; Haxhari, Filip; Savorani, Francesco

Delamination analysis of Functionally Graded Materials using Carrera Unified Formulation and Cohesive Zone Model 基于Carrera统一公式和粘结区域模型的梯度功能材料分层分析

COMPOSITE STRUCTURES

IF7.1

2025-06-03

PREAI

Mohammed, M. Nasseer A.; Augello, Riccardo; Demirbas, Munise Didem; Carrera, Erasmo

Digital light processing of ceria-stabilized zirconia: Role of powder pre-treatment on printability and physico-mechanical properties 氧化铈稳定氧化锆的数字光处理：粉末预处理对可打印性和物理机械性能的作用

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

IF6.2

2025-06-02

OAAI

Coppola, Bartolomeo; Fiume, Elisa; Terranova, Vanessa; Montanaro, Laura; Palmero, Paola

Non-Destructive methodology for the evaluation of residual stresses by using Active Infrared Thermography measurements 利用主动红外热成像测量的残余应力无损评估方法

NDT & E INTERNATIONAL

IF4.5

2025-06-02

PREAI

Corsaro, Luca; Cura, Francesca; Sesana, Raffaella

Phase-field simulation of particles rigid body motion at the early stage of sintering in powder bed fusion with electron beam: A proposal for computational efficiency 电子束粉末床熔融中烧结早期阶段颗粒刚体运动的相场模拟：计算效率提升方案

FINITE ELEMENTS IN ANALYSIS AND DESIGN

IF3.5

2025-06-01

OAAI

Galati, Manuela; Rizza, Giovanni

Tensile damage analysis of composite structures based on 3D Hashin failure criteria and 2D higher-order structural theories 基于3D Hashin失效准则和2D高阶结构理论的复合材料结构拉伸损伤分析

COMPOSITES COMMUNICATIONS

IF7.7

2025-06-01

OAAI

Petrolo, M.; Tortorelli, E.; Saputo, S.; Carrera, E.

Experimental investigation and dataset release of a taut-leg mooring system for a semi-submersible floating offshore wind turbine (vol 328, 121067, 2025)半潜式浮式海上风力涡轮机紧腿锚泊系统的实验研究及数据集发布（卷328，121067，2025）

OCEAN ENGINEERING

IF5.5

2025-06-01

OAAI

Francesco, Niosi; Oronzo, Dell'edera; Mattia, Glorioso; Bruno, Paduano; Giuseppe, Giorgi; Sebastian, Schreier

A behavioural-environmental model to study the impact of climate change denial on environmental degradation 一个行为-环境模型，用于研究气候否认对环境退化的影响

PHYSICA D-NONLINEAR PHENOMENA

IF2.9

2025-06-01

OAAI

Frieswijk, Kathinka; Zino, Lorenzo; Morse, A. Stephen; Cao, Ming

Kinetic facades as a solution for educational buildings: A multi-objective optimization simulation-based study 动态立面作为教育建筑解决方案：一项基于仿真的多目标优化研究

materials reports: energy

IF5.1

2025-06-01

PREAI

Bahri, Seyedehsara Yazdi; Forment, Marc Alier; Riera, Alberto Sanchez; Heiranipour, Milad; Hosseini, Seyedeh Nazli