Posco

学者数716

论文数850

被引数1

关联论文 (845)

发表时间

Comparative study on the hydrogen-induced cracking behavior of Al-Si- and Al-Fe-coated 31MnB5 martensitic steels 对比研究氢致开裂行为在Al-Si和Al-Fe涂层31MnB5马氏体钢中的表现

Journal of Materials Research and Technology-JMR&T

IF6.6

2026-08-26

OAAI

Seong-Min Ko; Seongwoo Kim; Jinkeun Oh; Young-Kook Lee

Galvanic displacement-driven nucleation control towards phosphophyllite-rich and corrosion-resistant zinc phosphate conversion coatings 电化学置换驱动的核化控制以制备富磷叶石且耐腐蚀的磷酸锌转化涂层

Journal of Materials Research and Technology-JMR&T

IF6.6

2026-08-14

OAAI

Jaeik Kwak; Jinhyeon Lee; Yeongyun Song; Byung-Jo Lee; Sang-Mun Jung; Yong-Tae Kim

Thermal stress build-up and thermal crack formation mechanisms in ferritic high-Si and austenitic high-Mn steels

Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing

IF7

2026-07-25

PREAI

Yeon-Seok Kim; Soo-Hyun Kim; Chang-Gon Jeong; Kyungchul Cho; Jae Sang Lee; Yoon-Uk Heo

Evolution Behavior of Non-metallic Inclusions in Al-Killed Ti-Bearing Ferritic Stainless Steel Under VOD Refining Conditions 在VOD精炼条件下铝镇静钛微合金化铁素体不锈钢中非金属夹杂物的演变行为

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE

IF3.1

2026-07-01

PREAI

Jung, Dong Yul; Jun, Yeong Jin; Park, Sung Jin; Kang, Soo Chang; Park, Joo Hyun

Numerical investigation on hysteretic behaviors of low-yield point SPSW frames 低屈服点钢板剪力墙框架的滞回性能数值研究

Journal of Constructional Steel Research

IF4.3

2026-05-08

PREAI

Yi Guo; HongSik Ryu; TaeSoo Kim

Applicability of 14.9 grade high strength bolt: Performance of material and connection 14.9级高强度螺栓的适用性：材料与连接性能

Construction and Building Materials

IF8

2026-05-04

PREAI

Ga-Yoon Park; Min-Hyun Seong; Taek-Ryong Seong; In-Rak Choi; Jin-Kook Kim

Author's Reply to Discussion on Advanced Chamfered Mold Design for Reducing Slab Corner Cracks in High-Speed Steel Casting 作者对关于高速钢铸造中减少板坯角裂的先进倒角模具设计讨论的回复

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE

IF3.1

2026-04-01

PREAI

Lee, Hyoung-Jun; Kwon, Sang-Hum; Cho, Seong-Mook; Thomas, Brian G.

Influence of Hydrodynamic Damping Model on Dynamic Response of Semisubmersible Floating Offshore Wind Turbine 半潜式浮式海上风力涡轮机动态响应中水动力阻尼模型的影响

Journal of Offshore Mechanics and Arctic Engineering-Transactions of the ASME

IF2.1

2026-03-01

PREAI

Kim, Dongeun; Lee, Yeonbin; Poguluri, Sunny Kumar; Kim, Eungsoo; Park, Ji Yong; Ha, Yoon Jin; Kim, Jeong Bin; Bae, Yoon Hyeok

Effect of Cu Addition to HSLA Steel on Its Corrosion Behavior in Neutral and Acidic Aqueous Solution Saturated with CO2 在CO2饱和的中性和酸性水溶液中，Cu添加对HSLA钢腐蚀行为的影响

Corrosion Science and Technology-Korea

IF1.3

2026-02-27

PREAI

Yun, Seong Jun; Yun, Duck Bin; Bang, Hye Rin; Pedanekar, Rupesh S.; Jamadar, Aasiya S.; Kim, Wan Geun; Park, Se Min; Park, Jin Sung; Lee, Jae Won; Kim, Sung Jin

Thermal Bridge Transfer Function Model (TBTFM) for Dynamic Heat Flux Analysis in Building Energy Simulation 建筑能耗模拟中动态热流分析的传热桥传递函数模型(TBTFM)

International Journal of Thermophysics

IF2.9

2026-02-02

PREAI

Kim, Heegang; Kim, Jihye

Experimental and Numerical Evaluation of Fire Performance in Modular Construction 模块化建筑中火灾性能的实验与数值评估

International Journal of Steel Structures

IF1.4

2026-01-01

PREAI

Choi, Joon-Young; Cho, Bong-Ho; Kim, Ju-Hyung; Ha, Tae-Hyu; Han, Kyu-Hong; Kim, Seul-Ah

A Study on the Drag Force According to the Material Properties of Steel Tube Caused by Ultra-High-Speed Superconducting Magnets Using Jiles-Atherton Modeling 基于Jiles-Atherton模型对超高速超导磁体引起的钢管材料属性相关拖曳力的研究

Journal of Electrical Engineering & Technology

IF1.6

2026-01-01

PREAI

Kim, Seong-Hwi; Lee, Ju; Cho, Wooyeon; Lee, Hyung-Woo

Effects of Al-Si Coating Quantity on the Wear Behavior of 22MnB5 Steel in Hot Stamping Al-Si涂层用量对热冲压22MnB5钢磨损行为的影响

Wear

IF6.1

2025-12-13

PREAI

Hee Geon Lee; Min-Ki Ji; Hyun-Hak Kang; Hyun-sung Son; Tea-Sung Jun

A hybrid physics–Bayesian framework for fatigue design curves under cryogenic conditions with consideration of load ratio and residual stress 一种考虑载荷比和残余应力的低温条件下疲劳设计曲线的混合物理-贝叶斯框架

Ocean Engineering

IF5.5

2025-12-08

PREAI

Yu Yao Lin; Yun-Jae Kim; Nak-Kyun Cho; Jin Ha Hwang; Kyu-Sik Park; Ali Mehmanparast; Do Kyun Kim

Stretch flangeability of hot-rolled Ti-Nb microalloyed steels containing tramp Cu, Sn and Sb 含混杂Cu、Sn和Sb的热轧Ti-Nb微合金钢的拉伸法兰成形性

Materials Science and Engineering: A

IF0

2025-12-06

PREAI

Ho Hyeong Lee; Chang Jae Yu; Jeongseok Kim; Sung-Il Kim; Dae Geon Lee; Heung Nam Han; Dong-Woo Suh

Enhanced high-temperature corrosion resistance of AlSi coated steel via Cr thin-film deposition and alloy phase formation 通过Cr薄膜沉积和合金相形成增强AlSi涂层钢的高温腐蚀抗性

Surface and Coatings Technology

IF6.1

2025-12-01

PREAI

Jaehyeon Kim; N. Rahul; Sang Won Lee; Min-Suk Oh

Chemical heterogeneity-induced high-strength ductile Fe-12Mn alloy with excellent low-temperature impact toughness 化学异质性诱导的高强度韧性Fe-12Mn合金，具有优异的低温冲击韧性

Materials Science and Engineering: A

IF0

2025-09-30

PREAI

T.T.T. Trang; Chang-Gon Jeong; Gun-Young Yoon; Dongwon Lee; Soo-Hyun Kim; Dong-Ho Lee; Sangchul Lee; Jae-Sang Lee; Yoon-Uk Heo

Effects of ZnAl-LDH on the corrosion resistance of heat-treated Al-Zn-Si coatings with a new elemental composition for hot stamping ZnAl-LDH对具有新元素组成的热处理Al-Zn-Si涂层在热冲压中的耐腐蚀性能的影响

Surfaces and Interfaces

IF6.3

2025-09-27

PREAI

Jeong-Min Choi; Kang-Min Lee; Seul-Gee Lee; Sang-Hee Kim; Hye-Min Kim; Myeong-Hoon Lee

Experimental and Numerical Investigation of Fracture Toughness in the Heat-Affected Zone of FH36 Steel for LCO₂ Vessels FH36钢用于LCO₂容器的热影响区断裂韧性实验与数值研究

Thin-Walled Structures

IF6.6

2025-09-10

PREAI

Yu Yao Lin; Jin Ha Hwang; Nak-Kyun Cho; Kyu Sik Park; Xing Ya Feng; Binbin Li; Do Kyun Kim

Phase transition behavior of MnO2 and CeO2 co-doped calcia stabilized zirconia under CaF2-based basic flux at high temperature 在CaF2基碱性熔剂中高温下MnO2和CeO2共掺杂钙稳定氧化锆的相变行为

Materials Letters

IF2.7

2025-09-04

PREAI

Janghoon Kim; Jaekwang Lee; Kanghee Jo; Taeheun Lim; Hwanseok Lee; Heesoo Lee