K. Sivaprasad - Publications, H-index & Citations

K. Sivaprasad

national institute of technology (nit system)

35H指数

155论文数

4.0K被引数

收录论文 42

发表时间

The influence of Laves phase morphology on the mechanical properties of rotary friction welded Inconel 718 fabricated by selective laser melting Laves相形貌对选择性激光熔化制备的旋转摩擦焊Inconel 718力学性能的影响

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2025-06-03

PREAI

Dinesh, Lanka; Susila, P.; Prashanth, K. G.; Sivaprasad, K.

Microstructural and mechanical behaviour of friction welded SS316L components fabricated by selective laser melting

MATERIALS TODAY COMMUNICATIONS

IF4.5

2023-12-01

PREAI

Lanka, Dinesh; Damodaram, R.; Sivaprasad, K.; Prashanth, K. G.

Fabrication, microstructure, and mechanical properties of Al-based metal matrix-TiB2-HEA hybrid composite

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2023-06-01

PREAI

Chinababu, M.; Rao, E. Bhaskar; Sivaprasad, K.

Additive Manufacturing of CoCrFeMnNi High-Entropy Alloy/AISI 316L Stainless Steel Bimetallic Structures

ADVANCED ENGINEERING MATERIALS

IF3.3

2022-06-30

PREAI

Sokkalingam, Rathinavelu; Chao, Zhao; Sivaprasad, Katakam; Muthupandi, Veerappan; Jayaraj, Jayamani; Ramasamy, Parthiban; Eckert, Juergen; Prashanth, Konda Gokuldoss

Subtle change in the work hardening behavior of fcc materials processed by selective laser melting

PROGRESS IN ADDITIVE MANUFACTURING

IF5.4

2022-04-21

PREAI

Sokkalingam, R.; Sivaprasad, K.; Singh, N.; Muthupandi, V; Ma, P.; Jia, Y. D.; Prashanth, K. G.

Influence of nickel-based buttering material on welded joint between SA508 low alloy steel and 304LN stainless steel

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING

IF3.5

2022-02-01

PREAI

Ravikiran, K.; Mehtani, H.; Sivaprasad, K.; Prasad, M. J. N., V; Kumar, Suranjit; Singh, P. K.; Ghosh, M.

Evolution of Microstructure and Mechanical Properties of LM25-HEA Composite Processed through Stir Casting with a Bottom Pouring System

MATERIALS

IF3.2

2021-12-29

OAAI

Chinababu, Mekala; Naga Krishna, Nandivelegu; Sivaprasad, Katakam; Prashanth, Konda Gokuldoss; Bhaskara Rao, Eluri

Comparison based on specific strength and density of in-situ Ti/Al and Ti/Ni metal intermetallic laminates

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2021-09-01

OAAI

Thiyaneshwaran, Nagarajan; Selvan, Chithirai Pon; Lakshmikanthan, Avinash; Sivaprasad, Katakam; Ravisankar, Balasubramanian

Deformation behavior of Al/Cu in-situ metal-intermetallic laminates at low and high strain rates

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2021-08-01

PREAI

Sonti, Kartheek S. M.; Dash, Biswaranjan; Vamsi, K. V.; Bandyopadhyay, H.; Ravisankar, B.; Sivaprasad, K.; Karthikeyan, S.

Characterization based analysis on TiAl3 intermetallic phase layer growth phenomenon and kinetics in diffusion bonded Ti/TiAl3/Al laminates

MATERIALS CHARACTERIZATION

IF5.5

2021-04-01

PREAI

Thiyaneshwaran, N.; Sivaprasad, K.; Ravisankar, B.

Electron-beam welding of high-entropy alloy and stainless steel: microstructure and mechanical properties

MATERIALS AND MANUFACTURING PROCESSES

IF4.7

2020-08-12

PREAI

Sokkalingam, R.; Mastanaiah, P.; Muthupandi, V; Sivaprasad, K.; Prashanth, K. G.

Effect of crack path and high angle grain boundaries on fracture toughness and fatigue behaviour of cryorolled AA2219

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

IF3.2

2020-08-09

PREAI

Blessto, B.; Katakam, Sivaprasad; Veerappan, Muthupandi; Arumugam, M.

Novel welding of Al0.5CoCrFeNi high-entropy alloy: Corrosion behavior

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2020-03-01

PREAI

Sokkalingam, R.; Sivaprasad, K.; Duraiselvam, M.; Muthupandi, V; Prashanth, K. G.

Excellent Combination of Tensile ductility and strength due to nanotwinning and a biamodal structure in cryorolled austenitic stainless steel

SCIENTIFIC REPORTS

IF3.9

2020-01-15

OAAI

Kumar, G. Venkata Sarath; Mangipudi, K. R.; Sastry, G. V. S.; Singh, Lalit Kumar; Dhanasekaran, S.; Sivaprasad, K.

Microstructure and mechanical properties of Al-3Mg-0.25 Sc alloy sheets produced by cryorolling

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2019-01-01

PREAI

Vigneshwaran, S.; Sivaprasad, K.; Narayanasamy, R.; Venkateswarlu, K.

Nucleation and growth of TiAl3 intermetallic phase in diffusion bonded Ti/Al Metal Intermetallic Laminate

SCIENTIFIC REPORTS

IF3.9

2018-11-14

OAAI

Thiyaneshwaran, N.; Sivaprasad, K.; Ravisankar, B.

Formability and fracture behaviour of cryorolled Al-3 Mg-0.25 Sc alloy 低温Al-3 Mg-0.25 Sc合金的成形性和断裂行为

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2018-04-01

PREAI

Vigneshwaran, S.; Sivaprasad, K.; Narayanasamy, R.; Venkateswarlu, K.

Synthesis of metal catalyst carbon nanotubes by arc-discharge method used for energy efficient applications

INTERNATIONAL CONFERENCE ON SUSTAINABLE ENGINEERING AND TECHNOLOGY (ICONSET 2018)

IF0

2018-01-01

PREAI

Saravanan, M. S. Senthil; Nagaraj, T.; Mohan, Sreejith; Singh, Shiva Rama Krishna; Sivaprasad, K.; Babu, S. P. Kumaresh; Sajin, J. B.

Corrosion behavior of ultrafine-grained AA2024 aluminum alloy produced by cryorolling 低温研磨生产的超细晶AA2024铝合金的腐蚀行为

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS

IF7.2

2017-11-09

PREAI

Kanta, P. Laxman Mani; Srivastava, V. C.; Venkateswarlu, K.; Paswan, Sharma; Mahato, B.; Das, Goutam; Sivaprasad, K.; Krishna, K. Gopala

Improving the corrosion properties of magnesium AZ31 alloy GTA weld metal using microarc oxidation process

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS

IF7.2

2017-05-04

PREAI

Prasad, M. Siva; Ashfaq, M.; Babu, N. Kishore; Sreekanth, A.; Sivaprasad, K.; Muthupandi, V.

研究方向