S. Pauly - Publications, H-index & Citations

S. Pauly

Leibniz Association

48H指数

142论文数

7.4K被引数

收录论文 92

发表时间

Non-monotonic fluctuation of structural heterogeneity in metallic glass due to cyclic rapid heat treatment

APPLIED PHYSICS LETTERS

IF3.6

2025-01-13

PREAI

Sun, K.; Yuan, X. D.; Zhang, N. Z.; Jia, Y. F.; Tseng, J. C.; Kosiba, K.; Jia, Y. D.; Shuai, C.; Pauly, S.; Wang, G.

Structural heterogeneity in levitated glassy alloys with different undercoolings 具有不同过冷度的悬浮玻璃态合金中的结构异质性

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2023-06-01

PREAI

Sun, K.; Weber, H.; Wang, G.; Wu, Y. H.; Andreoli, A. F.; Tseng, J. C.; Shen, J.; Zhang, B.; Jiang, H. R.; Xu, L. M.; Ma, X. D.; Zhang, N. Z.; Jia, Y. F.; Kosiba, K.; Kuhn, U.; Pauly, S.

Analysis of stress/strain distribution in dental mini-implants manufactured by additive manufacturing and machining

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS

IF3.4

2023-05-22

PREAI

de Oliveira, Thaisa Theodoro; Valente, Mariana Lima da Costa; Simoes, Isadora Gazott; Batalha, Rodolfo Lisboa; Macedo, Ana Paula; Bolfarini, Claudemiro; Pauly, Simon; dos Reis, Andrea Candido

Tailoring the superelastic properties of an additively manufactured Cu-Al-Mn shape memory alloy via adjusting the scanning strategy 通过调整扫描策略来定制增材制造的cu-al-mn形状记忆合金的超弹性性能

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2023-01-01

PREAI

Babacan, N.; Pilz, S.; Pauly, S.; Hufenbach, J.; Gustmann, T.

Efficient glassy alloy screening

NATURE MATERIALS

IF38.5

2022-02-02

PREAI

Pauly, Simon

Osteogenesis and angiogenesis of a bulk metallic glass for biomedical implants

BIOACTIVE MATERIALS

IF20.3

2022-02-01

OAAI

Sun, K.; Fu, R.; Liu, X. W.; Xu, L. M.; Wang, G.; Chen, S. Y.; Zhai, Q. J.; Pauly, S.

Influence of oxygen and plastic deformation on the microstructure and the hardness of a Ti-Nb-Ta-Zr-O Gum Metal

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2021-11-01

PREAI

da Silva, Murillo Romero; Gargarella, Piter; Plaine, Athos Henrique; Pauly, Simon; Bolfarini, Claudemiro

Structural evolution of a CuZr-based bulk metallic glass composite during cryogenic treatment observed by in-situ high-energy X-ray diffraction

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2021-08-01

OAAI

Xue, Peng; Huang, Yongjiang; Pauly, Simon; Guo, Fangmin; Ren, Yang; Jiang, Songshan; Guo, Feiya; Guo, Shu; Fan, Hongbo; Ning, Zhiliang; Sun, Jianfei

A refined local structure in a metallic glass tailored via flash-annealing

MATERIALS CHARACTERIZATION

IF5.5

2021-08-01

PREAI

Sun, K.; Xu, L. M.; Weber, H.; Wang, G.; Tseng, J. C.; Shen, J.; Wu, S. W.; Bian, X. L.; Kosiba, K.; Kuehn, U.; Pauly, S.

CuZr-based bulk metallic glass and glass matrix composites fabricated by selective laser melting 通过选择性激光熔化制备的CuZr基大块金属玻璃和玻璃基复合材料

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

IF14.3

2021-08-01

PREAI

Deng, Liang; Zhang, Long; Kosiba, Konrad; Limbach, Rene; Wondraczek, Lothar; Wang, Gang; Gu, Dongdong; Kuehn, Uta; Pauly, Simon

3D printing of bulk metallic glasses

MATERIALS SCIENCE & ENGINEERING R-REPORTS

IF26.8

2021-07-01

121

PREAI

Zhang, Cheng; Ouyang, Di; Pauly, Simon; Liu, Lin

Microstructural evolution and properties of a Ti-Nb-Ta-Zr-O prepared by high-pressure torsion

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2021-05-01

PREAI

da Silva, Murillo Romero; Gargarella, Piter; Plaine, Athos Henrique; Zeisig, Josephine; Pauly, Simon; Kuehn, Uta; Bolfarini, Claudemiro

Laser powder bed fusion of a superelastic Cu-Al-Mn shape memory alloy 超弹性cu-al-mn形状记忆合金的激光粉末床融合

MATERIALS & DESIGN

IF7.9

2021-05-01

OAAI

Babacan, N.; Pauly, S.; Gustmann, T.

Additive manufacturing of a quasicrystal-forming Al95Fe2Cr2Ti1 alloy with remarkable high-temperature strength and ductility

ADDITIVE MANUFACTURING

IF11.1

2021-05-01

PREAI

de Araujo, Aylanna P. M.; Pauly, Simon; Batalha, Rodolfo L.; Coury, Francisco G.; Kiminami, Claudio S.; Uhlenwinkel, Volker; Gargarella, Piter

Plastic deformation of a Zr-based bulk metallic glass fabricated by selective laser melting

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

IF14.3

2021-01-01

PREAI

Deng, L.; Kosiba, K.; Limbach, R.; Wondraczek, L.; Kuehn, U.; Pauly, S.

Guiding shear bands in bulk metallic glasses using stress fields: A perspective from the activation of flow units

PHYSICAL REVIEW B

IF3.7

2020-10-19

OAAI

Kosiba, K.; Scudino, S.; Bednarcik, J.; Bian, J.; Liu, G.; Kuhn, U.; Pauly, S.

Analysis of the mechanical and physicochemical properties ofTi-6Al-4 Vdiscs obtained by selective laser melting and subtractive manufacturing method

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS

IF3.4

2020-08-20

PREAI

da Costa Vermilion, Mariana Lima; de Oliveira, Thaisa Theodoro; Kreve, Simone; Batalha, Rodolfo Lisboa; de Oliveira, Diego Pedreira; Pauly, Simon; Bolfarini, Claudemiro; Bachmann, Luciano; dos Reis, Andrea Candido

Mechanical performance and corrosion behaviour of Zr-based bulk metallic glass produced by selective laser melting

MATERIALS & DESIGN

IF7.9

2020-04-01

OAAI

Deng, L.; Gebert, A.; Zhang, L.; Chen, H. Y.; Gu, D. D.; Kuehn, U.; Zimmermann, M.; Kosiba, K.; Pauly, S.

Long-term room-temperature aging treatment of a bulk metallic glass composite

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2020-04-01

PREAI

Xue, Peng; Huang, Yongjiang; Pauly, Simon; Jiang, Songshan; Guo, Shu; Ning, Zhiliang; Sun, Jianfei