Yu Wang

north university of china

H指数:15

被引数:1,497

个人简介

暂无内容

教育背景

暂无内容

工作经历

暂无内容

荣誉奖项

暂无内容

Tailoring microstructure and strength–ductility synergy in LPBF-fabricated TC4 alloy via heat-treatment route and holding-time control

通过热处理路径和保温时间控制调整LPBF制备TC4合金的微观结构和强度-塑性协同效应

Journal of Alloys and Compounds

IF6.3

2026-09-150

PRE

Enhancing solidification control of complex Al–Cu–Mg–Ag alloy castings via continuously cooled chilling sand casting

通过连续冷却激冷砂型铸造增强复杂Al–Cu–Mg–Ag合金铸件的凝固控制

Journal of Alloys and Compounds

IF6.3

2026-09-100

PRE

Influence of cooling rate on the microstructure andmechanical properties of recycled aluminum ordered porousstructures fabricated by indirect additive manufacturing

冷却速率对间接增材制造回收铝有序多孔结构微观结构及力学性能的影响

Journal of Alloys and Compounds

IF6.3

2026-06-130

PRE

Interlocking Cu/Al bimetal with nickel layer bionic structure interface perpetrated by additive-casting hybrid process

通过增材-铸造复合工艺制备的具有镍层仿生结构界面的互锁Cu/Al双金属

Journal of Alloys and Compounds

IF6.3

2025-12-210

PRE

Effect of fiber stacking orientation on the mechanical performance of self-piercing riveted, bonded, pre-holed, and hybrid single-lap joints between CFRP panels and aluminum blanks

纤维铺层方向对CFRP面板与铝板之间自冲铆接、胶接、预钻孔和混合单搭接接头力学性能的影响

Composite Structures

IF7.1

2025-12-070

PRE

Mechanism of annealing process affecting the microstructure and mechanical properties of 1235D cold-rolled sheets

退火过程影响1235D冷轧板微观结构和力学性能的机理

Journal of Alloys and Compounds

IF6.3

2025-09-260

PRE

Achieving well balanced strength-ductility synergy in Al-5Cu alloy by in-situ synthesis of single-phase TiB2/TiC or dual-phase TiB2-TiC particles

通过原位合成单相TiB2/TiC或双相TiB2-TiC颗粒实现Al-5Cu合金优异的强度-塑性协同效应

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2025-04-010

PRE

Effect of Gd on microstructure and corrosion resistance of as-cast Mg97Zn1Y2 alloy

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2024-09-011

PRE

Effect of steel-refractory reactions on inclusion modification in lanthanum-, cerium-, and yttrium-added steels

CERAMICS INTERNATIONAL

IF5.6

2024-09-013

PRE

Microstructure Evolution, Hardness, and Tribological Behaviors of Ti-50.8Ni SMA Alloy with Ultrasonic Surface Shot Peening Treatment

MATERIALS

IF3.2

2024-05-300

OAAI

Preparation of CoCrFeMnNi-based high-entropy/aluminide laminated composites: Multielement interdiffusion reactions

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2023-12-012

PRE

Preparation and oxidation characteristics of ZrC-ZrB2 composite powders with different proportions

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS

IF7.2

2021-12-173

PREAI

Strength performance and microstructural evolution of carbonated steel slag stabilized soils in the laboratory scale

实验室规模的碳酸钢渣稳定土的强度性能和微观结构演变

ENGINEERING GEOLOGY

IF8.4

2021-12-0132

PRE

Three-body abrasive wear behaviors and mechanism analysis of Fe-B-C cast alloys with various Mn contents

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2021-09-0116

OAAI

Balancing the fracture toughness and tensile strength by multiple additions of Zr and Y in Nb?Si based alloys

INTERMETALLICS

IF4.8

2021-06-0140

PRE

Microstructure and mechanical properties in core of a carburizing 20CrNi2MoV bearing steel subjected to cryogenic treatment

渗碳20CrNi2MoV轴承钢经过深冷处理后的组织和力学性能

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL

IF3.6

2021-01-079

PREAI

Oxidation behavior of FeCrAl coated Zry-4 under high temperature steam environment

FeCrAl涂层Zry-4在高温蒸汽环境下的氧化行为

CORROSION SCIENCE

IF8.5

2019-04-0195

PREAI

Corrosion behaviors of the copper alloy electrodes in ArF excimer laser operation process

HIGH POWER LASER SCIENCE AND ENGINEERING

IF5.7

2018-03-194

OAAI

3D neutron tomography of steel reinforcement corrosion in cement-based composites

CONSTRUCTION AND BUILDING MATERIALS

IF8

2018-02-0132

PREAI

A high-specific-strength and corrosion-resistant magnesium alloy

NATURE MATERIALS

IF38.5

2015-10-19648

PREAI

Yu Wang

个人简介

教育背景

工作经历

荣誉奖项

研究方向